Setup Guide for SD Series

Testing the headset system and the sound quality
14 | SD Series – Setup Guide
Testing the headset system and the
sound quality
Adjusting the headset system using the DIP switches
1 Press the Link button on the headset to disconnect an existing wireless
link between base station and headset.
The LEDs on the headset and on the base station go off.
2 Use a pointed object (e.g. a ball pen) to set the DIP switches to the
desir
ed position.
Co
nfiguring the handset lifter/hook switch
– DIP switches 1 and 2
The DIP switches 1 and 2 are only assigned a
function on the SD BS,
SD BS ML and SD BS Phone base stations.
1
2
1 2 3 4 5 6
DHSG
Handset Lifter
MSH
Short Range
Long Range
Auto Link ON
Auto Link OFF
Narrowband
Wideband
Limiter
Standard
Extra
Settings
Fast Link
Switch position Function
Manual operation
Lifts/hangs up the handset manually or using
the handset lifter (Sennheiser HSL 10 II).
Electronic hook switch (DHSG standard)
Call control via the headset system.
For faster link establishment, see Fast Link.
Electronic hook switch (MSH standard)
Call control via the headset system.
Fast Link for DHSG standard and HSL 10 II handset
lifter
Recommended for frequent callers. Shorter battery
life. Fast link establishment without delay due to
hidden link to the base station.