SDW 5000 Series User Guide
Table Of Contents
- Package contents
- Product overview
- Connecting the base station
- Connecting the base station to the mains power supply
- Pairing and charging the headset before first use
- Connecting the base station to a fixed line phone – SDW 5 BS only
- Connecting the base station to a computer
- Connecting the base station to Bluetooth devices – BTD 800 USB only
- Reconnecting/disconnecting Bluetooth
- Connecting an optional USB headset or speakerphone
- Connecting an optional busy light
- Assembling and wearing the headset SDW 10 HS
- Adjusting and wearing the headset SDW 30 HS | SDW 60 HS
- Labeling the headset
- Configuring the headset system
- Setting up and using the headset
- Making calls using the headset system
- Preparing calls - initial settings
- Selecting audio source – fixed line phone/ computer/ mobile phone
- Making a call
- Accepting/rejecting a call
- Transferring calls to connected devices
- Ending a call
- Redialing
- Putting a single active call on hold
- Managing multiple calls - two calls from two audio sources
- Setting up conference call
- Using the dictation mode
- Listening to music using the headset
- Using the motion sensor
- Charging the headset and storing the headset system
- Sharing a workplace
- Cleaning and maintaining the headset system
- If a problem occurs ...
- Specifications
SDW 5000 series headset system
CONNECTING THE BASE STATION11
Connecting the base station to a fixed line phone – SDW 5 BS only
Check which connection possibility is best suited for your telephone and follow the instructions
in the corresponding chapter A, B, C or D.
Place the base station at a minimum distance of 15 cm from the fixed line phone.
Connecting the base station to a fixed line phone without headset socket
1
A
2
1 2 3 4 5 6 7 8
Disconnect the handset cable from the telephone.
Connect it to the Handset socket on the base station.
Connect the telephone cable to the handset socket
and to the Phone socket on the base station.
Use a pointed object to set the DIP switches 1 and 2 at
the bottom of the base station to the position shown.
Connecting the base station to a fixed line phone with headset socket
1
B
2
1 2 3 4 5 6 7 8
S1 S2
Connect the telephone cable to the headset socket on
the telephone and to the Phone socket (marked green)
on the base station.
Use a pointed object to set the DIP switches 1 and 2 to
the position shown.