SDW 5000 Series User Guide
Table Of Contents
- Package contents
- Product overview
- Connecting the base station
- Connecting the base station to the mains power supply
- Pairing and charging the headset before first use
- Connecting the base station to a fixed line phone – SDW 5 BS only
- Connecting the base station to a computer
- Connecting the base station to Bluetooth devices – BTD 800 USB only
- Reconnecting/disconnecting Bluetooth
- Connecting an optional USB headset or speakerphone
- Connecting an optional busy light
- Assembling and wearing the headset SDW 10 HS
- Adjusting and wearing the headset SDW 30 HS | SDW 60 HS
- Labeling the headset
- Configuring the headset system
- Setting up and using the headset
- Making calls using the headset system
- Preparing calls - initial settings
- Selecting audio source – fixed line phone/ computer/ mobile phone
- Making a call
- Accepting/rejecting a call
- Transferring calls to connected devices
- Ending a call
- Redialing
- Putting a single active call on hold
- Managing multiple calls - two calls from two audio sources
- Setting up conference call
- Using the dictation mode
- Listening to music using the headset
- Using the motion sensor
- Charging the headset and storing the headset system
- Sharing a workplace
- Cleaning and maintaining the headset system
- If a problem occurs ...
- Specifications
SDW 5000 series headset system
CONNECTING THE BASE STATION17
Connecting an optional USB headset or speakerphone
You can connect a Sennheiser USB headset or a USB speakerphone at any time, if for example the battery of your
SDW headset is empty or to add other participants to your conference call.
Connecting a USB headset
1
2
Connect the headset to the USB socket on the base
station.
The LED lights up white.
Connecting a speakerphone
-
+
To use an external speaker with microphone such as the
Sennheiser speakerphone SP 10, SP 20 or SP 220:
Connect your speakerphone to the USB socket of the
base station.
The LED lights up white.
If you want to recharge the SDW headset - while using
the speakerphone:
Ensure the headset is docked before you initiate the
call OR
Double tap the icon on the base station to transfer
the call from the headset to the speakerphone.
Connecting an optional busy light
The busy light UI 10 BL signals to your colleagues if
you are available or in a call. The busy light UI 10 BL is
available as an accessory.
Connect the busy light to the Busy socket of the base
station.
The LED of the busy light lights up while the base
station is switched on (see page 8).
Attach the busy light to your monitor or to your desk –
if required (see UI 10 BL Quick Guide).