SDW 5000 Series User Guide
Table Of Contents
- Package contents
- Product overview
- Connecting the base station
- Connecting the base station to the mains power supply
- Pairing and charging the headset before first use
- Connecting the base station to a fixed line phone – SDW 5 BS only
- Connecting the base station to a computer
- Connecting the base station to Bluetooth devices – BTD 800 USB only
- Reconnecting/disconnecting Bluetooth
- Connecting an optional USB headset or speakerphone
- Connecting an optional busy light
- Assembling and wearing the headset SDW 10 HS
- Adjusting and wearing the headset SDW 30 HS | SDW 60 HS
- Labeling the headset
- Configuring the headset system
- Setting up and using the headset
- Making calls using the headset system
- Preparing calls - initial settings
- Selecting audio source – fixed line phone/ computer/ mobile phone
- Making a call
- Accepting/rejecting a call
- Transferring calls to connected devices
- Ending a call
- Redialing
- Putting a single active call on hold
- Managing multiple calls - two calls from two audio sources
- Setting up conference call
- Using the dictation mode
- Listening to music using the headset
- Using the motion sensor
- Charging the headset and storing the headset system
- Sharing a workplace
- Cleaning and maintaining the headset system
- If a problem occurs ...
- Specifications
SDW 5000 series headset system
ASSEMBLING AND WEARING THE HEADSET SDW 10 HS23
Detaching headband, ear hook or neckband
CAUTION
Improper handling can damage the product!
If the charging pin and microphone boom overlap while detaching, they can break.
Rotate the charging pin as shown.
1
2
Rotate the holder with the charging pin away from the
microphone boom.
Hold the headset with the one hand.
Slide one finger of the other hand into the small recess
on the headband or wearing style adapter.
3
CLICK!
CLICK!
Pull the two units apart from each other.
The headset loosens and you hear a click.
Remove the headset from the holder.