SDW 5000 Series User Guide
Table Of Contents
- Package contents
- Product overview
- Connecting the base station
- Connecting the base station to the mains power supply
- Pairing and charging the headset before first use
- Connecting the base station to a fixed line phone – SDW 5 BS only
- Connecting the base station to a computer
- Connecting the base station to Bluetooth devices – BTD 800 USB only
- Reconnecting/disconnecting Bluetooth
- Connecting an optional USB headset or speakerphone
- Connecting an optional busy light
- Assembling and wearing the headset SDW 10 HS
- Adjusting and wearing the headset SDW 30 HS | SDW 60 HS
- Labeling the headset
- Configuring the headset system
- Setting up and using the headset
- Making calls using the headset system
- Preparing calls - initial settings
- Selecting audio source – fixed line phone/ computer/ mobile phone
- Making a call
- Accepting/rejecting a call
- Transferring calls to connected devices
- Ending a call
- Redialing
- Putting a single active call on hold
- Managing multiple calls - two calls from two audio sources
- Setting up conference call
- Using the dictation mode
- Listening to music using the headset
- Using the motion sensor
- Charging the headset and storing the headset system
- Sharing a workplace
- Cleaning and maintaining the headset system
- If a problem occurs ...
- Specifications
SDW 5000 series headset system
LABELING THE HEADSET 25
Labeling the headset
1
www.sennheiser.com/name-plate-maker
TYPE
PRINT
CUT
A
Tina
SDW 60
Name Plate Maker
2
SDW 10 HS SDW 30 HS
SDW 60 HS
Open the „Name Plate Maker“ under:
www.sennheiser.com/name-plate-maker.
Follow the instructions to create your nameplate.
SDW 10 HS:
Detach the headband or wearing style adapter from
the headset (see page 23).
SDW 30 HS | SDW 60 HS:
Tilt the earcup with the boom arm as shown.
3
SD W 10
4
Remove the cover. Replace the name plate.
5
6
Slide the cover in the holder. SDW 10 HS:
Reassemble the headset with the headband or wearing
style adapter (see page 18).