SDW 5000 Series User Guide
Table Of Contents
- Package contents
- Product overview
- Connecting the base station
- Connecting the base station to the mains power supply
- Pairing and charging the headset before first use
- Connecting the base station to a fixed line phone – SDW 5 BS only
- Connecting the base station to a computer
- Connecting the base station to Bluetooth devices – BTD 800 USB only
- Reconnecting/disconnecting Bluetooth
- Connecting an optional USB headset or speakerphone
- Connecting an optional busy light
- Assembling and wearing the headset SDW 10 HS
- Adjusting and wearing the headset SDW 30 HS | SDW 60 HS
- Labeling the headset
- Configuring the headset system
- Setting up and using the headset
- Making calls using the headset system
- Preparing calls - initial settings
- Selecting audio source – fixed line phone/ computer/ mobile phone
- Making a call
- Accepting/rejecting a call
- Transferring calls to connected devices
- Ending a call
- Redialing
- Putting a single active call on hold
- Managing multiple calls - two calls from two audio sources
- Setting up conference call
- Using the dictation mode
- Listening to music using the headset
- Using the motion sensor
- Charging the headset and storing the headset system
- Sharing a workplace
- Cleaning and maintaining the headset system
- If a problem occurs ...
- Specifications
SDW 5000 series headset system
SETTING UP AND USING THE HEADSET32
Swapping the direction of the volume buttons
You can change the direction of the Volume button‘s up/down function if, for example, you want to wear the headset
on the other ear. SDW 10 HS: If the motion sensor is enabled, the volume keys automatically swap direction when you
change the wearing side.
“Swap volume keys“
3s
Make sure that the headset is in idle mode (no active
call or music reproduction).
Press and hold the Mute & Volume button.
The direction of the button‘s volume up/down function
is changed. The voice prompt “Swap volume keys” is
announced in the headset.
SDW 60 HS:
Stereo channels left/right will be changed too.
You can also change this setting via
HeadSetup™ Pro.
Muting the headset’s microphone
Muting the microphone Unmuting the microphone
SDW 10 HS
SDW 30 HS
SDW 60 HS
SDW 10 HS
SDW 30 HS
SDW 60 HS
Press the Mute & Volume button on the headset OR
SDW 30 HS | SDW 60 HS: Mute button on the boom
arm OR
Touch the Mute button on the base station.
The microphone is muted and the LED lights up red.
The voice prompt “Mute on“ is announced.
Press the Mute & Volume button on the headset OR
SDW 30 HS | SDW 60 HS: Mute button on the boom
arm OR
Touch the Mute button on the base station.
The muting is canceled and the LED switches off.
The voice prompt “Mute off“ is announced.
Enabling/disabling voice prompts
3s
”Voice on” / ”Voice off”
Take the headset out of the base station.
Simultaneously press and hold the hook and mute
button until you hear 2 beeps, then release the button.
The voice prompts are now activated/deactivated
and the voice prompt “Voice on” or “Voice off” is
announced in the headset.
If the voice prompts are deactivated, the headset
emits beeps.