SDW 5000 Series User Guide
Table Of Contents
- Package contents
- Product overview
- Connecting the base station
- Connecting the base station to the mains power supply
- Pairing and charging the headset before first use
- Connecting the base station to a fixed line phone – SDW 5 BS only
- Connecting the base station to a computer
- Connecting the base station to Bluetooth devices – BTD 800 USB only
- Reconnecting/disconnecting Bluetooth
- Connecting an optional USB headset or speakerphone
- Connecting an optional busy light
- Assembling and wearing the headset SDW 10 HS
- Adjusting and wearing the headset SDW 30 HS | SDW 60 HS
- Labeling the headset
- Configuring the headset system
- Setting up and using the headset
- Making calls using the headset system
- Preparing calls - initial settings
- Selecting audio source – fixed line phone/ computer/ mobile phone
- Making a call
- Accepting/rejecting a call
- Transferring calls to connected devices
- Ending a call
- Redialing
- Putting a single active call on hold
- Managing multiple calls - two calls from two audio sources
- Setting up conference call
- Using the dictation mode
- Listening to music using the headset
- Using the motion sensor
- Charging the headset and storing the headset system
- Sharing a workplace
- Cleaning and maintaining the headset system
- If a problem occurs ...
- Specifications
SDW 5000 series headset system
USING THE DICTATION MODE43
Using the dictation mode
Recording desk or mobile phone calls with the Dictation mode
SDW 5000 offers a Dictation mode which allows recording of phone calls via an application on your computer. In
this mode the microphone is always open towards the computer, so that a call on the desk or mobile phone can be
recorded.
To switch the Dictation mode on: To switch the Dictation mode off:
1s
“Dictation mode ON“
1s
“Dictation mode OFF“
Make sure, that the system is in idle mode (no active
call or music).
Touch the icon or and the on the base station
simultaneously for 1 second.
The Dictation mode is switched on. The voice prompt
“Dictation mode ON“ is announced. The base station
LED lights up green and the selected audio source
LED or lights up white.
The Dictation mode will stay on if the headset is docked.
Calls can only be received and made from the selected
audio source (desk or mobile phone). Other audio
sources are inactive.
If you receive a call on an inactive source:
Switch the Dictaphone mode off and accept the call.
Touch the icon or (LED white) and the on the
base station simultaneously for 1 second.
The Dictation mode is switched off. The voice prompt
“Dictation mode OFF“ is announced. The base station
LED
switches off.
Dictation mode will also be switched off if the base
station is powered off or re-booted.
Recording computer‘s audio
You can record calls or any audio signal directly via a computer application. Listening to recordings on a computer is
only possible, while Dictation mode for phones is switched off (see above).