SDW 5000 Series User Guide
Table Of Contents
- Package contents
- Product overview
- Connecting the base station
- Connecting the base station to the mains power supply
- Pairing and charging the headset before first use
- Connecting the base station to a fixed line phone – SDW 5 BS only
- Connecting the base station to a computer
- Connecting the base station to Bluetooth devices – BTD 800 USB only
- Reconnecting/disconnecting Bluetooth
- Connecting an optional USB headset or speakerphone
- Connecting an optional busy light
- Assembling and wearing the headset SDW 10 HS
- Adjusting and wearing the headset SDW 30 HS | SDW 60 HS
- Labeling the headset
- Configuring the headset system
- Setting up and using the headset
- Making calls using the headset system
- Preparing calls - initial settings
- Selecting audio source – fixed line phone/ computer/ mobile phone
- Making a call
- Accepting/rejecting a call
- Transferring calls to connected devices
- Ending a call
- Redialing
- Putting a single active call on hold
- Managing multiple calls - two calls from two audio sources
- Setting up conference call
- Using the dictation mode
- Listening to music using the headset
- Using the motion sensor
- Charging the headset and storing the headset system
- Sharing a workplace
- Cleaning and maintaining the headset system
- If a problem occurs ...
- Specifications
SDW 5000 series headset system
USING THE MOTION SENSOR45
Using the motion sensor
The headset is equipped with a motion sensor that registers when the headset is put in or out of rest position.
Enabling/disabling the motion sensor
“Motion sensor on”
“Motion sensor off“
Put on the headset and place the ear cup on the left
ear.
Press the volume button as shown and simultaneously
the hook button. Hold the buttons until you hear three
beeps.
The motion sensor is enabled/disabled and you can
choose your wearing side. The voice prompt “Motion
sensor on” or “Motion sensor off” is announced.
You can also change this setting via
HeadSetup™ Pro.
Using the motion sensor
Lift the headset from the desk and put it on.
The sensor registers motion and the incoming call is
accepted.
SDW 30 HS | SDW 60 HS:
Music will be paused when you lay down the headset and
resumed when you put on the headset again.