SDW 5000 Series User Guide
Table Of Contents
- Package contents
- Product overview
- Connecting the base station
- Connecting the base station to the mains power supply
- Pairing and charging the headset before first use
- Connecting the base station to a fixed line phone – SDW 5 BS only
- Connecting the base station to a computer
- Connecting the base station to Bluetooth devices – BTD 800 USB only
- Reconnecting/disconnecting Bluetooth
- Connecting an optional USB headset or speakerphone
- Connecting an optional busy light
- Assembling and wearing the headset SDW 10 HS
- Adjusting and wearing the headset SDW 30 HS | SDW 60 HS
- Labeling the headset
- Configuring the headset system
- Setting up and using the headset
- Making calls using the headset system
- Preparing calls - initial settings
- Selecting audio source – fixed line phone/ computer/ mobile phone
- Making a call
- Accepting/rejecting a call
- Transferring calls to connected devices
- Ending a call
- Redialing
- Putting a single active call on hold
- Managing multiple calls - two calls from two audio sources
- Setting up conference call
- Using the dictation mode
- Listening to music using the headset
- Using the motion sensor
- Charging the headset and storing the headset system
- Sharing a workplace
- Cleaning and maintaining the headset system
- If a problem occurs ...
- Specifications
SDW 5000 series headset system
CHARGING THE HEADSET AND STORING THE HEADSET SYSTEM47
Charging the headset using the CH 30 charger | Charging several headsets simultaneously
The CH 30 headset charger and the MCH 7 multi USB power source are optional accessories. The CH 30 allows you
to charge additional SDW headsets, e.g. for sharing the same base station when working in shifts. Several CH 30 in
connection with the MCH 7 allow to charge up to 7 headsets simultaneously.
CH 30
optional
MCH 7
Refer to the Quick Guide of the CH 30 or MCH 7 for more information.
Switching the headset system off during extended non-use
You can switch off the headset system or the headset when not using the products for extended periods of time
(e.g. when you are on holiday).
Switching the headset system off Switching the headset off
3x
5s
Disconnect the base station from the mains power
supply and the computer.
The base station and headset switch off immediately,
all LEDs switch off.
Press and hold the hook button for 5 seconds to switch
off the headset.
The Headset LED flashes red 3 times. The Headset
battery status LEDs on the base station switch off. The
LED lights up red.
To switch the headset on again:
Press the hook button.