set 810_93286_0106_Sp7.book Seite 1 Donnerstag, 19.
set 810_93286_0106_Sp7.book Seite 1 Donnerstag, 19. April 2007 4:29 16 The SET 810 is an assistive listening system for your radio, TV, hi-fi system or similar sound sources at the volume you choose. The system allows you to move around freely without the constrictions of cables within the room where the transmitter is placed. The system uses invisible infrared light for sound transmission.
set 810_93286_0106_Sp7.book Seite 2 Donnerstag, 19.
set 810_93286_0106_Sp7.book Seite 3 Donnerstag, 19. April 2007 4:29 16 The rear of the transmitter is fitted with two audio inputs: A socket (LINE) for connection to the audio output or the headphone socket on your TV, and a microphone socket (MIC). Plug in one end of the connecting cable to the audio output or the headphone socket on your TV, and the other end to the LINE socket on the transmitter. If your TV set is fitted with a SCART socket, use the supplied adapter.
set 810_93286_0106_Sp7.book Seite 4 Donnerstag, 19. April 2007 4:29 16 English Where to place the transmitter Place the transmitter so that the infrared light beam is pointed directly at the receiver, i.e. there should be no obstacles in the light path between transmitter and receiver. Guide the cables backwards. Avoid exposure to direct sunlight. Direct sunlight may interfere with the reception and may damage the transmitter.
set 810_93286_0106_Sp7.book Seite 5 Donnerstag, 19. April 2007 4:29 16 Using the stethoset receiver English When putting the stethoset receiver on, make sure the operating control is pointing downwards and the letters are at the front. The stethoset receiver automatically turns on if you pull the earbows apart.
set 810_93286_0106_Sp7.book Seite 6 Donnerstag, 19. April 2007 4:29 16 English Adjusting the volume Adjust the receiver's volume with the operating control. Make sure your hand doesn't cover the operating control completely. This may prevent interference-free reception. If you are not using the stethoset receiver, store it on the transmitter so that the battery can be recharged.
set 810_93286_0106_Sp7.book Seite 7 Donnerstag, 19. April 2007 4:29 16 Turning the automatic compression system on English Use the COM switch (compression) at the rear of the transmitter to turn the automatic compression system on. This system reproduces soft passages louder and decreases loud sounds. Choose the setting that suits your listening preferences. Use the MO/ST switch to choose between mono and stereo transmission.
set 810_93286_0106_Sp7.book Seite 8 Donnerstag, 19. April 2007 4:29 16 Charging the battery English Place the receiver into the transmitter's charging compartment, with the operating control at the front. The left LED on the transmitter must light up. Charge the battery for 24 hours before you use it for the first time. The normal charging time is 4-5 hours. A fully charged battery has an operating time of approx. 4 hours. Always store the receiver on the transmitter to ensure that it is fully charged.
set 810_93286_0106_Sp7.book Seite 9 Donnerstag, 19. April 2007 4:29 16 This system uses infrared light which is emitted by the transmitter and received by the stethoset receiver. Please note that infrared light emitted by other light sources may interfere with the useful signal of the SET 810. If the light path between transmitter and receiver is obstructed by clothing such as scarves etc., the reception may also be disturbed. Varnish or furniture polish may degrade the rubber feet of the transmitter.
set 810_93286_0106_Sp7.book Seite 10 Donnerstag, 19. April 2007 4:29 16 WARNING: English When people use headphones, they tend to choose a higher volume than with loudspeakers. However, if your hearing has deteriorated and you need to rely on an assitive listening system, please avoid listening at high volume levels for a long time. Please protect your hearing.
set 810_93286_0106_Sp7.book Seite 11 Donnerstag, 19. April 2007 4:29 16 Accessories ATTENTION: Components from other manufacturers (e.g. for power supply or battery) may cause damage to the unit and will invalidate the waranty.
English set 810_93286_0106_Sp7.book Seite 12 Donnerstag, 19. April 2007 4:29 16 BA 151 rechargeable battery By using a spare accupack, you can use the stethoset receiver for more than four hours of continuous operation. Always store the spare accupack in the small charging compartment at the right of the transmitter. The right LED on the transmitter lights up green to show charging is taking place. When charging an battery in the small charging compartment, the charging time is 10-12 hours.
set 810_93286_0106_Sp7.book Seite 13 Donnerstag, 19. April 2007 4:29 16 RI 810 S clip-on receiver Instead of earbows, this receiver features a socket for connecting a headphone or a connecting cable which allows its use with a hearing aid. MKE 800 TV external microphone If your TV doesn't have a headphone output, SCART or RCA socket, you can use your SET 810 together with the MKE 800 TV microphone. Fix the microphone to the loudspeaker of your TV by means of Velcro tape.
set 810_93286_0106_Sp7.book Seite 14 Donnerstag, 19. April 2007 4:29 16 English If problems occur...
set 810_93286_0106_Sp7.book Seite 15 Donnerstag, 19. April 2007 4:29 16 Adjusting the earbow pressure Loosen the screw at the rear of the stethoset receiver. Move the screw in the long hole to the desired position (continuously adjustable). 1 = Low earbow pressure 2 = High earbow pressure Tighten the screw. English Additional information for hearing aid acousticians 1 2 Adjustments for hearing disabilities Turn the operating control fully counterclockwise (0).
English set 810_93286_0106_Sp7.book Seite 16 Donnerstag, 19. April 2007 4:29 16 Adjusting the max. volume: Potentiometer turned fully counterclockwise Potentiometer turned fully clockwise 0 dB 125 dB Adjusting the bass response: Potentiometer turned fully counterclockwise Potentiometer turned fully clockwise attenuation of -25 dB at 100 Hz attenuation 0 dB The adjustments can also be made when the receiver is being used.
set 810_93286_0106_Sp7.book Seite 17 Donnerstag, 19. April 2007 4:29 16 System Modulation Carrier frequencies AF frequency response S/N ratio FM, stereo 2.3 / 2.8 MHz 40 Hz ....... 15 kHz 60 dB A rms Transmitter AF input voltage Audio input Microphone socket Charging time for battery Charging time (spare battery) Power supply Weight Dimensions 50 mV ...... 5 V 3.5 mm jack, stereo/mono 2.5 mm jack, mono approx. 4 h approx. 10-12 h 24 V DC via NT 810 mains unit approx. 94 g (without battery) diameter: 3.
set 810_93286_0106_Sp7.book Seite 18 Donnerstag, 19. April 2007 4:29 16 Manufacturer declarations English CE Declaration of Conformity This equipment is in compliance with the essential requirements and other relevant provisions of Directives 2006/95/EC. The declaration is available on the internet site at www.sennheiser.com.
set 810_93286_0106_Sp7.book Seite 130 Donnerstag, 19. April 2007 4:29 16 Sennheiser electronic GmbH & Co.KG 30900 Wedemark, Germany Phone +49 (5130) 600 0 Fax +49 (5130) 600 300 www.sennheiser.com Printed in Germany Publ.