Wireless TV Listening System Set 840 S Instruction manual
I 1 5 5 2 3 4 6 7 R
II D 8 C 9 B A 0 H I G E F
Contents Contents Safety instructions .................................................................... 2 Delivery includes ....................................................................... 4 Product overview ...................................................................... 5 Putting the Set 840 S system into operation ......................... 6 Setting up the transmitter ................................................... 6 Connecting the transmitter to a sound source ...................
Safety instructions Safety instructions • • • • • • • • • • • • • 2 Please read this instruction manual carefully and completely before using the products. Make this instruction manual easily accessible to all users at all times. Always include this instruction manual when passing the products on to third parties. Do not use the products in situations which require special attention (e.g. when performing skilled jobs). Always keep the products dry and do not expose them to extreme temperatures.
Safety instructions Intended use Intended use includes • having read this instruction manual, especially the chapter “Safety instructions” on page 2, • using the products within the operating conditions and limitations described in this instruction manual. “Improper use” means using the products other than as described in this instruction manual, or under operating conditions which differ from those described herein.
Delivery includes Delivery includes The Set 840 S system is available as an EU and a US version. The following table shows which items are included with the respective version. Components of the Set 840 S system 1 RR 840 S receiver with BA 300 Lithium-Polymer rechargeable battery 1 TR 840 transmitter with integrated charging compartments 1 NT 9-3AW mains unit with 2 country adapters (EU, UK) 2 country adapters (US, AU) 1 1 1 connection cable with two 3.
Product overview Product overview The overview pictures of the receiver and the transmitter can be found on the inside front cover of this instruction manual.
Putting the Set 840 S system into operation Putting the Set 840 S system into operation Setting up the transmitter 왘 Choose a suitable place near your sound source (e.g. TV). 왘 Do not place the transmitter close to metal objects such as shelf bars, reinforced concrete walls, etc. as this can decrease the transmitter’s range. It is not necessary that the transmitter and receiver are in the same room, so you can move around freely in the home or outside in the garden.
Putting the Set 840 S system into operation Connecting the transmitter to a sound source 왘 Switch your sound source (e.g. TV) off before connecting the transmitter. E J 왘 Plug one end of the connection cable J into the blue socket E of the transmitter. 왘 Check the available connection possibilities of your sound source (e.g.
Putting the Set 840 S system into operation A Connecting the transmitter to a headphone socket 왘 Plug the other end of the connection cable J into the headphone socket on your sound source. K Is the plug on the connection cable too small for the headphone socket? J 왘 Plug the adapter to ¼” (6.3 mm) jack socket K onto the connection cable J. 왘 Adjust the volume of the headphone socket on your sound source to a medium level. This improves the quality of wireless sound transmission.
Putting the Set 840 S system into operation C Connecting the transmitter to a SCART socket 왘 Plug the SCART adapter M onto the connection cable J. 왘 Connect the SCART adapter M to the SCART socket on your TV. M J If your TV has several SCART sockets, use the socket SCART output. D Using the MKE 800 TV-N external microphone What if your sound source doesn’t have any of the connections mentioned above? You can then use the optional MKE 800 TV-N microphone.
Putting the Set 840 S system into operation To connect the MKE 800 TV-N microphone: 왘 If possible, adhere the supplied Velcro tape directly in front of the loudspeaker of your TV. 왘 Press the microphone onto the Velcro tape. 왘 Connect the jack plug of the microphone to the blue socket E of the transmitter. You can change the sound by varying the position of the microphone in front of the loudspeaker.
Putting the Set 840 S system into operation Connecting the transmitter to the mains The EU and UK country adapters are included with the EU version of the Set 840 S; the US country adapter and the AU country adapter are supplied with the US variant of the Set 840 S. 왘 Slide the supplied country adapter O onto the mains unit N. 왘 Connect the yellow connector of the mains unit to the yellow socket I of the transmitter. 왘 Plug the mains unit N into a wall socket.
Putting the Set 840 S system into operation Connecting the induction loop or headphones for hearing aids to the receiver The socket 5 of the receiver allows you to connect • the supplied induction loop R, • headphones or • a connection cable to your hearing aid or to induction couplers. Connecting the induction loop 왘 Carefully remove the clip P from the receiver. 왘 Attach the clip of the induction loop as shown. 왘 Connect the induction loop R to the socket 5 of the receiver.
Putting the Set 840 S system into operation Connecting headphones 5 왘 Connect the 3.5 mm jack plug of the headphones to the socket 5 of the receiver. Wearing the receiver In order to wear the receiver, you can use the supplied lanyard Q, the clip P or the supplied induction loop R. The induction loop is suitable for users of hearing aids, the lanyard and the clip are useful if you are using headphones.
Putting the Set 840 S system into operation Attaching the receiver to clothing or belt If you want to attach the receiver to your clothing or belt, use the attachment clip P. P To attach the receiver: 왘 Attach the clip P clothing or belt. to your To remove the receiver: 왘 14 Pull the clip P with the receiver away from your clothing or belt.
Using the Set 840 S system Using the Set 840 S system To switch the Set 840 S system on, proceed as follows: Sequence of steps Page 1. Switch your sound source (e.g. TV) on. 15 2. Adjust the volume on the receiver to a low level. 16 3. Switch the receiver on. 16 4. Adjust the desired volume on the receiver. 16 5. If necessary, set a different channel on the 17 transmitter. Switching the transmitter on/off To switch the transmitter on: 왘 Switch your sound source on.
Using the Set 840 S system Switching the receiver on/off CAUTION! Hearing damage due to high volumes! This receiver allows you to set higher volumes than conventional devices. This can cause hearing damage in persons with healthy hearing and especially in children. 왘 Before using the receiver, set the volume on the receiver to a low level. 왘 Do not continuously expose yourself to high volumes. To switch the receiver on: 왘 Keep the on/off button 3 pressed until the channel indicator 1 lights up.
Using the Set 840 S system Searching for a sound source 왘 Switch the receiver on. The receiver automatically searches for one of the 3 channels of the transmitter and starts the channel search on the last selected channel. If a channel is found, the channel search stops. Your hear the sound of the sound source found.
Using the Set 840 S system 왘 왘 Change, if necessary several times, the position of the channel selector switch H on the transmitter to change to an interference-free channel. You can choose between 3 channels. H Press the channel search button 6 on the receiver to re-start the channel search. If reception is still subject to interference: 왘 Read the chapter “If a problem occurs ...” on page 26. Adjusting the balance The balance control allows for right/left volume adjustment.
Using the Set 840 S system Meaning of the terms “mono” and “stereo” Stereo (ST) L Mono (MO) R L+R Example: L: Speech from the left R: Music from the right You hear speech from the You hear speech and music left and music from the coming from the front. right. Individually enhancing the speech intelligibility D The “speech intelligibility” button C allows you to adjust the sound to your individual needs. C Try out which setting works best for you.
Using the Set 840 S system Storing and charging the receiver 왘 After use, place the receiver into the transmitter’s charging compartment 8 without exerting too much pressure. The receiver automatically switches off. B A 8 The Sennheiser logo can face the operation indicator B or away from it. When the receiver is placed correctly into the charging compartment, the indicator A lights up: red: The battery is being charged. green: The battery is fully charged.
Using the Set 840 S system Charging a rechargeable battery in the transmitter’s charging compartment You can charge the receiver’s rechargeable battery or a spare BA 300 rechargeable battery (not included in the delivery of the Set 840 S) in the charging compartment 9 at the side of the transmitter. The spare battery offers extended listening time while the discharged first battery is being recharged. Before using the spare rechargeable battery for the first time, charge it for at least 3 hours.
What if ... What if ... ... this indicator lights up? Indicator Channel indicator 1 on the receiver Status lit yellow flashes off 22 Operation indicator B on the transmitter lit green Charging indicator A lit red Charging indicator 0 lit green “Speech intelligibility” indicator D on the transmitter lit yellow off off Meaning The receiver has just been switched on or a button has just been pressed. The distance between receiver and transmitter is too great.
What if ... ... you press this button? Button Channel search button 6 on the receiver “Speech intelligibility” button C on the transmitter Function Searches for the sound source or a different channel Page 17 Selects one of the possible settings in order to individually enhance the speech intelligibility 19 ...
What if ... ... you hear acoustic signals or warning signals? Acoustic signal 3 ascending beeps 3 descending beeps The receiver has just been switched off. 1 acknowledgement beep The channel search button has been pressed once briefly. The channel search button has been pressed for 5 seconds. The receiver is set to channel 1, 2 or 3. 1–3 short beeps Warning signal 6 short beeps 2 long beeps 24 Meaning The receiver has just been switched on.
Cleaning the Set 840 S system To switch the acoustic signals on and off: 왘 Press the channel search button 6 on the receiver for approx. 5 seconds. 6 You hear a short acoustic signal. Warning signals cannot be switched off. Cleaning the Set 840 S system Cleaning the transmitter and the receiver CAUTION! Danger of electric shock and damage to the device electronics! Liquids entering the housing of the devices can cause a short-circuit and damage the electronics.
If a problem occurs ... If a problem occurs ... The transmitter does not switch on Possible cause Solution Is the mains unit Check the connection of the mains connected correctly? unit to the transmitter and to the mains (see page 11). Is the sound source Switch your sound source on. switched on? Is the volume of the sound source sufficient? Set the volume on your sound source to a medium level.
If a problem occurs ... You hear the sound only with one ear Possible cause Is the balance adjusted correctly? Is the transmitter set to mono? Solution Turn the balance control 4 to the left or right (see page 18). Set the ST/MO switch F on the transmitter to mono (MO) (see page 18).
Additional technical information Additional technical information Fine adjusting the speech intelligibility The speech intelligibility can be enhanced individually on the transmitter (see page 19).
Additional technical information 왘 Use a screwdriver to turn the treble boost control G to the left or right until the sound can be heard very well. The position “0” corresponds to a minimum boost, the position “MAX” corresponds to a maximum boost, and the control is factory-preset to the medium position. G Function of the treble boost control By means of the transmitter’s steplessly adjustable treble boost control G, the audio signal is boosted as shown in the diagram.
Accessories and spare parts Accessories and spare parts CAUTION! Danger of damage to the device! Components from other manufacturers (e.g. for power supply or rechargeable battery) may cause damage to the device and will invalidate the warranty. 왘 Use only original Sennheiser accessories and spare parts. For the Set 840 S, the following receivers and stethoset receivers are available from your specialist dealer: Cat. No.
Accessories and spare parts The following Set 840 S accessories are available from your specialist dealer: Cat. No. 500898 502566 504061 003448 528185 528184 517627 500974 502710 001676 004658 001678 004657 002408 004652 002409 004653 Accessory/spare part BA 300 spare rechargeable battery EZT 3011 induction loop EZT 3012 induction loop EZI 120 induction couplers Lanyard Clip for attaching the receiver Extension cable, 3 m (3.
Specifications Specifications System Modulation Carrier frequencies EU version US version Frequency response THD Charging time for rechargeable battery Signal-to-noise ratio (1 mV, peak deviation) Operating temperature Transmitter RF radiated power EU version US version Range EU version US version Audio/microphone connection Power supply Max. power consumption (transmitter in conjunction with the NT 9-3AW mains unit) Max.
Specifications Receiver Audio connection Power supply Operating time Weight Dimensions NT 9-3AW mains unit Nominal input voltage Mains frequency Nominal output voltage Nominal output current Temperature range Relative humidity 3.5 mm stereo jack socket via BA 300 rechargeable Li-Pol battery (3.7 V / 150 mAh) up to 9 hours approx. 50 g (with BA 300) approx.
Specifications NT 9-3AW mains unit in compliance with Europe USA Canada Australia EMC: EN 55013, EN 55020 Safety: EN 60950-1 EMC: 47CFR15_B Safety: UL 60950-1 Energy Efficiency: DOE Level VI EMC: ICES-003 Safety: CAN/CSA-C22.2 NO. 60950-1 EMC: AS/NZS 4268 Safety: AS/NZS 60950-1 In addition, the NT 9-3AW mains unit is certified in accordance with the legal safety requirements of China, Japan, Korea, Russia, Singapore and Taiwan.
Manufacturer Declarations Manufacturer Declarations Warranty Sennheiser electronic GmbH & Co. KG gives a warranty of 24 months on this product. For the current warranty conditions, please visit our website at www.sennheiser.com or contact your Sennheiser partner. FOR AUSTRALIA ONLY Sennheiser’s goods come with guarantees that cannot be excluded under the Australian Consumer Law.
Manufacturer Declarations In compliance with the following requirements • WEEE Directive (2012/19/EU) Please dispose of the devices at the end of their operational lifetime by taking them to your local collection point or recycling center for such equipment. • Battery Directive (2013/56/EU) The supplied batteries or rechargeable batteries can be recycled. Please dispose of them as special waste or return them to your specialist dealer.
Manufacturer Declarations Statements regarding FCC and Industry Canada This equipment complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this equipment may not cause harmful interference, and (2) this equipment must accept any interference received, including interference that may cause undesired operation.
Index Index Receiver Adjusting the balance 18 Adjusting the volume 16 Attaching the receiver to clothing 14 Automatic channel search 17 Channel indicator (meaning) 22 Cleaning 25 No sound signal 26 Operating elements 5 Operating time 20 Reception is subject to interference 17 Searching for a sound source 17 Sound is hardly intelligible 27 Sound is only audible with one ear 27 Storing and charging the receiver 20 Switching the acoustic signals off 25 Switching the receiver on/off 16 Rechargeable battery Rep
Sennheiser electronic GmbH & Co. KG Am Labor 1, 30900 Wedemark, Germany www.sennheiser.com Publ.
