Operation Manual
Table Of Contents
- Safety instructions
- Delivery includes
- Product overview
- Putting the Set 900 into operation
- Using the Set 900
- Switching the transmitter on/off
- Switching the receiver on/off
- Searching for a sound source
- Adjusting the volume
- Adjusting the balance
- Switching between mono and stereo operation
- Individually enhancing the speech intelligibility
- Switching the microphones on/off
- Storing and charging the receiver
- Charging a rechargeable battery in the transmitter’s charging compartment
- Folding up the receiver for transportation
- What if...
- Cleaning the Set 900
- If a problem occurs ...
- Additional technical information
- Accessories and spare parts
- Specifications
- Manufacturer declarations
- Index
7
Putting the Set 900 into operation
Connecting the transmitter to a sound source
왘 Switch your sound source (e.g. TV) off before connecting
the transmitter.
왘 Plug one end of the connection cable L into the blue
socket F on the transmitter.
왘 Check the connection possibilities of your sound source
(e.g. TV).
왘 Select one of the four connection possibilities , ,
or and follow the instructions in the corresponding
chapter.
Note:
If there are several connections ( , or ) available,
select the SCART socket .
Connection
possibility
Socket on
sound
source
–
Name of
connection
possibility
Head-
phone
socket
RCA
socket
SCART
socket
MKE 800 TV-N
external
microphone*
*
The MKE 800 TV-N microphone is available as an
accessory (see page 30).
F
L
A
B
C
D
LR
A
B
C
D
A
B
C
C