SK 100 Instruction manual
Contents Contents Important safety instructions .................................................2 The SK 100 G3 bodypack transmitter....................................3 The frequency bank system............................................... 3 Areas of application............................................................. 4 Delivery includes.........................................................................5 Product overview........................................................................
Important safety instructions Important safety instructions • Read this instruction manual. • Keep this instruction manual. Always include this instruction manual when passing the product on to third parties. • Heed all warnings and follow all instructions in this instruction manual. • Use only a cloth for cleaning the product. • Do not place the product near any heat sources such as radiators, stoves, or other devices (including amplifiers) that produce heat.
The SK 100 G3 bodypack transmitter The SK 100 G3 bodypack transmitter This bodypack transmitter is part of the evolution wireless series generation 3 (ew G3). With this series, Sennheiser offers high-quality state-of-the-art RF transmission systems with a high level of operational reliability and ease of use. Transmitters and receivers permit wireless transmission with studio-quality sound.
The SK 100 G3 bodypack transmitter For an overview of the frequency presets, please refer to the supplied frequency information sheet. Updated versions of the frequency information sheet can be downloaded from the SK 100 G3 product page on our website at www.sennheiser.com. The frequency bank “U” allows you to freely select and store frequencies. It might be that these frequencies are not intermodulation-free.
Delivery includes Delivery includes The packaging contains the following items: 1 SK 100 G3 bodypack transmitter 2 AA size batteries, 1.
Product overview Product overview Overview of the SK 100 G3 bodypack transmitter 쐋 쐃 쐇 쐏 씉 쐂 씈 쐄 쐂 쐆 쐉 쐊 쐈 쐎 쐅 쐈 쐃 Microphone/instrument input (MIC/LINE), 3.
Product overview Overview of the displays After switch-on, the bodypack transmitter displays the standard display “Frequency/Name”. For further illustrations and examples of the different standard displays, refer to page 15. The display backlighting is automatically reduced after approx. 20 seconds. 햲 햳 햴 햵 533.
Putting the bodypack transmitter into operation Putting the bodypack transmitter into operation Inserting the batteries/accupack For powering the bodypack transmitter, you can either use two 1.5 V AA size batteries or the rechargeable Sennheiser BA 2015 accupack (see “Accessories and spare parts” on page 30). 왘 Open the battery compartment by pushing the two catches 쐈 in the direction of the arrows and open the cover 쐅. 쐈 쐂 쐅 쐂 쐅 왘 Insert the two batteries or the accupack as shown above.
Putting the bodypack transmitter into operation 왘 Use one of the recommended Sennheiser microphones or the optional CI 1 instrument cable (see “Accessories and spare parts” on page 30). 왘 Connect the 3.5 mm jack plug 씊 from the Sennheiser microphone or instrument cable to the 3.5 mm jack socket MIC/LINE 쐃. 씊 쐃 씋 왘 Lock the 3.5 mm jack plug by screwing down the coupling ring 씋. 왘 Via the operating menu, adjust the sensitivity of the microphone/line input (see page 20).
Putting the bodypack transmitter into operation ME 4 왘 Use the microphone clip 씌 to attach the microphone to clothing (e.g. tie, lapel). 씌 The ME 4 clip-on microphone has a cardioid pick-up pattern. 왘 Position the ME 4 so that its sound inlet is directed towards the sound source (e.g. mouth). Attaching the bodypack transmitter to clothing You can use the belt clip 씍 to attach the bodypack transmitter to clothing (e.g. belt, waistband).
Using the bodypack transmitter Using the bodypack transmitter To establish a transmission link, proceed as follows: 1. Switch the receiver on (see the instruction manual of the receiver). 2. Switch the bodypack transmitter on (see next section). The transmission link is established and the receiver’s RF level display “RF” reacts. It is vital to observe the notes on frequency selection on page 26.
Using the bodypack transmitter To switch the bodypack transmitter off: 왘 If necessary, deactivate the lock mode (see page 12). ON/OFF 왘 Keep the ON/OFF button pressed until “OFF” appears on the display panel. The red ON LED 쐏 goes off and the display panel turns off. When in the operating menu, pressing the ON/ OFF button will cancel your entry (ESC function) and return you to the current standard display.
Using the bodypack transmitter 왘 Press the SET button. The lock mode is temporarily deactivated. How you are using the bodypack transmitter determines how long the lock mode remains deactivated: When you are in the operating menu The lock mode remains deactivated until you exit the operating menu. When one of the standard displays is shown The lock mode is automatically activated after 10 seconds. The lock mode icon 햶 flashes prior to the lock mode being activated again. 533.
Using the bodypack transmitter The current state of the muting function or the RF signal is displayed on the display panel of the bodypack transmitter. 533.
Using the bodypack transmitter Selecting a standard display 왘 Press the rocker button to select a standard display: Contents of the display 533.875 MHz ew100 G3 AF “Frequency bank/Channel/ Frequency” P MUTE ew100 G3 B.Ch: 20.12 AF “Frequency/Name” P MUTE B.Ch: 20.12 533.
Using the operating menu Using the operating menu A special feature of the Sennheiser ew G3 series is the consistent, intuitive menu structure of transmitters and receivers. As a result, adjustments to the settings can be made quickly – even in stressful situations, for example on stage or during a live show or presentation. Make use of the possibility to adjust settings via the operating menu of the receiver and to transfer these settings to the bodypack transmitter.
Using the operating menu Overview of the operating menu Main menu “Menu” Sensitivity Frequency Preset Name Auto Lock Advanced Exit Display Extended menu “Advanced Menu” Tune Mute Mode Cable Emulation Pilot Tone LCD Contrast Reset Software Revision Exit Function of the menu item Main menu “Menu” Sensitivity Adjusts the sensitivity “AF” (see page 20) Frequency Preset Sets the frequency bank and the channel (see page 21) Name Enters the transmitter name (see page 22) Auto Lock Activates/deactivates t
Using the operating menu Working with the operating menu If the lock mode is activated, you have to deactivate it In order to be able to work with the operating menu (see page 12). By way of example of the “Sensitivity” menu, this section describes how to use the operating menu. Changing from a standard display to the operating menu 왘 Press the SET button. The current standard display is replaced by the main menu. The last selected menu item is displayed.
Using the operating menu Exiting a menu item 왘 Change to the “Exit” menu item. Menu Exit 왘 Confirm your selection. You return to the next higher menu level. To directly return to the current standard display: ON/OFF 왘 Press the ON/OFF button.
Adjusting settings via the operating menu Adjusting settings via the operating menu Make use of the possibility to adjust settings via the operating menu of your receiver and to transfer these settings to the bodypack transmitter. For more information, refer to the instruction manual of the receiver. The relevant information is marked with the sync icon.
Adjusting settings via the operating menu The following figures are a guide to the best settings: Transmission situation Sensitivity setting Loud music/vocals −30 to −21 dB Presentations −21 to 0 dB Instrument input Electric guitars with single coil pickups −30 to −24 dB Electric guitars with humbucker pickups −45 to −30 dB Guitars with active electronics (active pickups, active EQs, piezo pickups) −45 to −30 dB Selecting the frequency bank and the channel manually – “Frequency Preset” SET SET
Adjusting settings via the operating menu Entering a name – “Name” SET SET Name Lichael Menu Name Name Michael Lichael Call up “Name” Enter a character and confirm Enter a character; store the setting SET “Stored” Via the “Name” menu, you can enter a freely selectable name (e.g. the name of the performer) for the bodypack transmitter. The name can be displayed on the standard displays “Frequency/Name” and “Name/Frequency bank/Channel”.
Adjusting settings via the operating menu The extended menu “Advanced Menu” Setting transmission frequencies for the frequency bank “U” – “Tune” When you have selected one of the system banks and then select the “Tune” menu, the bodypack transmitter automatically switches to channel 1 of the frequency bank “U”. In this case, “U.1” briefly appears on the display panel. Upon delivery, the channels of the frequency bank “U” are not assigned a transmission frequency.
Adjusting settings via the operating menu Advanced Menu Tune 543.200 MHz SET SET Tune 543.200 MHz B.Ch: U. 1 Tune 543.200 MHz B.Ch: U. 1 Select the channel; store the setting Call up “Tune” (special function) Set the frequency SET “Stored” 왘 Set the desired channel. 왘 Press the SET button. The frequency selection appears. 왘 Set the desired frequency. 왘 Press the SET button. Your settings are stored. You are back to the operating menu.
Adjusting settings via the operating menu The bodypack transmitter adds an inaudible signal, known as the pilot tone, to the transmitted signal. The receiver detects and evaluates the pilot tone. The pilot tone supports the receiver’s squelch function (Squelch) and protects against interference due to RF signals from other devices. Devices of the ew 100 G1 series (generation 1) do not support the pilot tone function.
Synchronizing the bodypack transmitter with a receiver Synchronizing the bodypack transmitter with a receiver When synchronizing the bodypack transmitter with a receiver, please observe the following: 왘 Only use a transmitter and a receiver from the same frequency range (see the type plate on the transmitter and the receiver). 왘 Make sure that the desired frequencies are listed in the enclosed frequency information sheet.
Cleaning the bodypack transmitter Cleaning the bodypack transmitter CAUTION! Liquids can damage the electronics of the bodypack transmitter! Liquids entering the housing of the device can cause a short-circuit and damage the electronics. 왘 Keep all liquids away from the bodypack transmitter. 왘 Use a cloth to clean the bodypack transmitter from time to time. 왘 Do not use any solvents or cleansing agents.
Recommendations and tips Recommendations and tips ... for the ME 2 and ME 4 clip-on microphones • To reduce level variations to a minimum when the user turns his or her head away from the microphone, attach the microphone as centrally as possible. • To protect the microphone against excessive sweat/ moisture, avoid direct skin contact. • Attach the microphone carefully and conduct the cable so that noise due to friction is avoided.
If a problem occurs ... If a problem occurs ... Problem Possible cause Possible solution Bodypack transmitter cannot be operated, “Locked” appears on the display panel Lock mode is activated Deactivate the lock mode (see page 12). No operation indication Batteries are flat Replace the batteries or or accupack is flat recharge the accupack (see page 8).
Accessories and spare parts Accessories and spare parts The following accessories are available from your specialist dealer: Cat. No. Product name and description 009950 BA 2015 accupack 009828 L 2015 charger 503168 CC 3 system case 009825 BPP 1 bodypack pouch Adapters 009827 DC 2 power adapter (12 V DC) Cables 005021 CI 1 instrument cable (with ¼” (6.
Specifications Specifications RF characteristics Modulation wideband FM Frequency ranges 516–558, 566–608, 626–668, 734–776, 780–822, 823–865 MHz (A–E, G, see page 3) Transmission frequencies 1,680 frequencies, tuneable in steps of 25 kHz 20 frequency banks, each with up to 12 factorypreset channels 1 frequency bank with up to 12 user programmable channels Switching bandwidth 42 MHz Nominal/peak deviation ±24 kHz/±48 kHz Frequency stability ≤ ±15 ppm RF output power at 50 Ω typ.
Specifications Current consumption: at nominal voltage typ. 180 mA (30 mW) with switched-off transmitter ≤ 25 μA Operating time typ. 8 hrs Dimensions approx. 82 x 64 x 24 mm Weight (incl. batteries) approx.
Specifications Polar diagrams and frequency response curves of the microphones Polar diagram ME 3 0° 0 30° 60° Polar diagram ME 4 30° 30° 5 10 10 60° 60° 15 25 90° dB 120° 120° 150° 150° 180° 250 Hz 60° 20 25 125 Hz 30° 15 20 90° 0° 0 5 500 Hz 1000 Hz 2000 Hz 4000 Hz 90° 90° dB 120° 125 Hz 120° 150° 250 Hz 150° 180° 2000 Hz 4000 Hz 8000 Hz 500 Hz 8000 Hz 16000 Hz 1000 Hz 16000 Hz Frequency response curve ME 2 dBV -10 -20 -30 -40 -50 -60 50 100 200 500 1.
Manufacturer Declarations Manufacturer Declarations Warranty Sennheiser electronic GmbH & Co. KG gives a warranty of 24 months on this product. For the current warranty conditions, please visit our web site at www.sennheiser.com or contact your Sennheiser partner.
Manufacturer Declarations • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This class B digital device complies with the Canadian ICES-003. Changes or modifications made to this equipment not expressly approved by Sennheiser electronic Corp.
Index Index A Accupack charging 8 inserting 8 Activating/deactivating lock mode (Auto Lock) 22 pilot tone 24 Adjusting cable emulation 24 contrast (LCD Contrast) 25 input sensitivity (Sensitivity) 20 Advanced Menu (extended menu) overview 17 settings 23 AF (audio level) 7 AF PEAK (overmodulation) 7 Attaching bodypack transmitter 10 microphones 9 Audio signal, muting (Mute) 13 Auto Lock (activating/deactivating the lock mode) 22 B Batteries, inserting 8 Bodypack transmitter attaching to clothing 10 cleani
Index Frequency preset frequencies 3 ~ ranges 3 selecting ~ presets 21 setting the transmission ~ 23 Frequency bank overview 3 selecting (Frequency Preset) 21 ~ system 3 Frequency Preset (selecting a frequency bank/ channel) 21 I Infra-red transmission 26 Inserting (batteries/accupack) 8 Instrument cable, connecting 8 L LCD Contrast (contrast of the display panel) 25 Lock mode activating/deactivating (Auto Lock) 22 deactivating temporarily 12 Locked (lock mode activated) 12 M Menu (main menu) overview 17
Index Setting up transmission link 26 Software Revision (displaying the software revision) 25 Switching on/off bodypack transmitter 11 Synchronizing (bodypack transmitter/receiver) 26 T Transmission frequency selecting (Frequency Preset) 21 setting (Tune) 23 Transmission power, optimizing 28 Troubleshooting 29 Tune (setting a transmission frequency) 23 U Unlock (deactivating the lock mode) 12 Using bodypack transmitter 11 operating menu 18 38
Sennheiser electronic GmbH & Co. KG Am Labor 1, 30900 Wedemark, Germany www.sennheiser.com Printed in Germany Publ.
