Instruction manual SK 2000

21
Cleaning the bodypack transmitter
Cleaning the bodypack transmitter
왘 Use a cloth to clean the bodypack transmitter from time to time.
If a problem occurs ...
CAUTION ! Liquids can damage the electronics of the bodypack
transmitter!
Liquids entering the housing of the device can cause a
short-circuit and damage the electronics.
왘 Keep all liquids away from the bodypack transmitter.
Problem Possible cause Possible solution
Bodypack transmitter
cannot be operated,
“Locked” appears on
the
d
isplay panel
Lock mode is
activated
Deactivate the lock mode
(see page 12).
No operation
indication
Batteries are flat or
accupack is flat
Replace the batteries or
recharge the accupack
(see page 8).
No RF signal at the
receiver
Bodypack trans-
mitter and receiver
are not on the
same channel
Set the bodypack trans-
mitter to the same channel
as the receiver.
Synchronize the bodypack
transmitter with the
receiver (see page 20).
Bodypack trans-
mitter is out of
range
Reduce the distance
between bodypack
transmitter and receiving
antenna.
Increase the transmission
power (“RF Power” menu
item
).
RF signal is
deactivated
(“RF Mute“)
Activate the RF signal
(see page 13).