Instruction manual SK 2000
Table Of Contents
- SK_2000_U1_U4_549128_1013_INT_EN
- SK2000_529677_0409_PRT_US
- Important safety instructions
- The SK 2000 bodypack transmitter
- Delivery includes
- Product overview
- Putting the bodypack transmitter into operation
- Using the bodypack transmitter
- Using the operating menu
- Synchronizing the bodypack transmitter with a receiver
- Cleaning the bodypack transmitter
- If a problem occurs ...
- Specifications
7
Product overview
Overview of the displays
After switch-on, the bodypack transmitter displays the standard display
“Frequency/Name”. For further illustrations and ex
amples of the different
standard displays, refer to page 15. The display backlighting is automati-
cally reduced after approx. 20 seconds.
Display Meaning
햲 Audio level “AF” Modulation of the bodypack transmitter
When the audio input level is excessively high,
the “AF” display shows full deflection and, in
addition, the
ye
llow AF PEAK LED 쐄 lights up:
햳 Frequency Current transmission frequency
햴 Name Freely selectable name of the transmitter
햵 Transmission icon RF signal is being transmitted
햶 Lock mode icon Lock mode is activated
햷 “P” (pilot tone) Pilot tone transmission is activated
햸 “MUTE” Microphone or line input is muted
햹 Battery status Charge status:
MHz
543.200
**2000**
MUTE
P
AF
햳 햴
햲
햶
햵
햹햸햷
쐄
approx. 100%
approx. 70%
approx. 30%
charge status is critical
, the red
LOW BATT LED 쐏
is flashing:
쐏