Users Manual

Adjustment tips for the operating menu
21
The frequencies are tuneable in 5-kHz steps within a switching bandwidth of 184 MHz max.
There are two options for setting the frequencies:
• You can set a new frequency for the selected channel:
• You can change to a different channel and set a new frequency for the new channel:
When operating a multi-channel system, make sure to only use intermodulation-free
frequencies.
 In the selection mode of the “TUNE” menu, press the multi-function
switch  (switch position SET). The current channel number
appears on the LC display panel and then the currently assigned
frequency is displayed.
 Change the frequency by sliding the multi-function switch  to the
position  (UP) or  (DOWN).
 Store your setting.
 Press the multi-function switch  (switch position SET) for a
longer time. The current channel flashes on the LC display panel.
 Select a new channel by sliding the multi-function switch  (UP) or
 (DOWN).
 Confirm your selection by pressing the mult-function switch (switch
position SET).
 The current frequency of the selected channel is displayed.
Change the frequency by sliding the multi-function switch  to the
position  (UP) or  (DOWN).
 Store your setting.
SET
DOWN
UP

CH
CH
MHz
MHz
CH
CH
CH
RF
CH
SET
DOWN
UP

MHz
MHz