Users Manual

Using the SK 6212

167

The lock-off is activated on the transmitter.

See „Operating the SK 6212 menu“.

Transmission power

The transmission power is set to Low.

See „Operating the SK 6212 menu“.

Operating the SK 6212 menu

Navigating through the menu

To open the menu:

▷ Press the SET button.

The operating menu is shown on the transmitter display panel.

To open a menu item:

▷ Press the UP or DOWN buttons to navigate through the individual

menu items.

▷ Press the SET button to open the selected menu item.

„Operating elements of the SK 6212 bodypack transmitter“

Making changes in a menu item

After you open a menu item, you can make changes as follows:

▷ Press the UP or DOWN buttons to set the displayed value.

▷ Press the SET button to save the setting.

▷ Press the ESC (ON/OFF) button to leave the menu item without saving

the setting.

„Operating elements of the SK 6212 bodypack transmitter“

Menu item overview

In the menu items, you can configure the settings below and display infor-

mation.

Frequency menu item

In this menu item, you can adjust a frequency in 25 kHz steps.

Observe the general requirements and restrictions for using frequencies at

the following address: