Instruction manual SKM 100 G3
Table Of Contents
- Important safety instructions
- The SKM 100 G3 radio microphone family
- Delivery includes
- Product overview
- Putting the radio microphone into operation
- Using the radio microphone
- Using the operating menu
- Adjusting settings via the operating menu
- The main menu “Menu”
- The extended menu “Advanced Menu”
- Setting transmission frequencies and the frequency bank “U” – “Tune”
- Setting a transmission frequency for the current channel
- Selecting a channel and assigning this channel a frequency
- Activating/deactivating the pilot tone transmission – “Pilot Tone”
- Adjusting the contrast of the display panel – “LCD Contrast”
- Loading the factory-preset default settings – “Reset”
- Displaying the software revision – “Software Revision”
- Adjustment tips
- Cleaning the radio microphone
- If a problem occurs ...
- Specifications
11
Using the radio microphone
Using the radio microphone
To establish a transmission link, proceed as follows:
1. Switch the receiver on (see the instruction manual of the receiver).
2. Switch the radio microphone on (see below).
The transmission link is established and the receiver’s RF level display
“RF” reacts.
Switching the radio microphone on/off
To switch the radio microphone on (online operation):
To switch the radio microphone off:
If necessary, deactivate the lock mode (siehe Seite 12).
To switch the radio microphone on and to deactivate the RF signal on
switch-on (offline operation):
To activate the RF signal:
Briefly press the ON/OFF button 쐉.
The radio microphone transmits an RF signal. The transmis-
sion icon 햵 is displayed.
The red ON LED 쐎 lights up and the standard display
“Frequency/Name” appears on the display panel.
You can switch the radio microphone on and deactivate the
RF signal on switch-on. For more information, see below.
Press the ON/OFF button 쐉 until “OFF” appears on the
display panel. The red ON LED 쐎 goes off and the display
panel turns off.
When in the operating menu, pressing the ON/OFF button 쐉 will
cancel your entry (ESC function) and return you to the current
standard display.
Press the ON/OFF button 쐉 until “RF Mute On?” appears on
the display panel.
Press the multi-function switch 쐈.
The transmission frequency is displayed but the radio micro-
phone does not transmit an RF signal. The transmission
icon 햵 is not displayed.
Use this function to save battery power or to prepare a
radio microphone for use during live operation without
causing interference to existing transmission links.
Briefly press the ON/OFF button 쐉.
“RF Mute Off” appears on the display panel.
Press the multi-function switch 쐈.
The transmission icon 햵 is displayed again.
쐎
쐉
P
햵
ON/OFF
ON/OFF
ON/OFF
MHz
533.875
ew100 G3
MUTE
P
AF
햵
ON/OFF