Instruction manual SKM 100 G3

18
Adjusting settings via the operating menu
The extended menu “Advanced Menu”
Setting transmission frequencies and the frequency bank “U” –
“Tune”
When you have selected one of the system banks and then select the
“Tune” menu, the radio microphone automatically switches to channel 1
of the frequency bank “U”. In this case, “U.1” briefly appears on the display
panel. Upon delivery, the channels of the frequency bank “U” are not
assigned a transmission frequency.
When you are in the “Tune” menu item, the RF signal is deactivated.
Via the “Tune” menu item, you can set a transmission frequency to be
stored in the current channel or you can select a different channel and
assign it a transmission frequency. It is vital to observe the notes on
frequency selection on Seite 20.
Setting a transmission frequency for the current channel
 Set the desired frequency.
Selecting a channel and assigning this channel a frequency
 Set the desired channel.
 Set the desired frequency.
 Move the multi-function switch until the “Tune” menu item
appears.
 Press the multi-function switch .
The frequency selection appears.
 Press the multi-function switch.
Your settings are stored.
You are back to the operating menu.
 Move the multi-function switch until the “Tune” menu item
appears.
 Press the multi-function switch until the frequency bank
selection appears.
 Press the multi-function switch.
The frequency selection appears.
533.875 MHz
Tune
534.875 MHz
B.Ch: U. 1 B.Ch: U. 1
Tune
Advanced Menu
Tune
533.875 MHz
Select the MHz
value and confirm
Select the kHz
value; store the
setting
Call up “Tune”
“Stored”
543.200 MHz
Tune
B.Ch: U. 1 B.Ch: U. 1
Tune
Advanced Menu
Tune
543.200 MHz
543.200 MHz
Call up “Tune”
(special function)
“Stored”
Select the channel;
store the setting
Set the
frequency