Instruction manual

12
Using the radio microphone
To activate the RF signal:
Deactivating the lock mode temporarily
You can activate or deactivate the automatic lock mode via the “Auto
Lock” menu item (see page 18). If the lock mode is activated, you have
to temporarily deactivate it In order to be able to operate the radio
microphone:
The lock mode icon  flashes prior to the lock mode being activated.
Muting the audio signal or
deactivating the RF signal
The MIC button  allows you to mute the audio signal or to deactivate the
RF signal. Via the “Mute Mode” menu item, you can set the desired func-
tion of the MIC button  (see page 20):
 From the “Mute Mode” menu item, select the desired setting
(see page 20).
 Briefly press the ON/OFF button .
“RF Mute Off” appears on the display panel.
 Press the multi-function switch.
The transmission icon  is displayed again.
 Move the multi-function switch upwards/downwards.
“Unlock?” appears on the display panel.
 Press the multi-function switch.
The lock mode is temporarily deactivated.
Setting Mic button  ... Function
“AF On/Off” Press briefly Mutes the audio signal
permanently
Unmutes the audio signal
permanently
“RF On/Off” Press briefly Deactivates the RF signal
(offline operation)
Activates the RF signal
(online operation)
“Push To Mute” Keep pressed Mutes the audio signal
temporarily
(cough function)
“Push To Talk”
*
*If you select “Push To Talk”, the radio microphone will be muted until
you press the MIC button.
Keep pressed Unmutes the audio signal
temporarily
(speech function)
“Disabled” Press briefly/
keep pressed
None
ON/OFF
MHz
543.200
ew300 G3
MUTE
P
AF

쐋