Instruction manual

17
Adjusting settings via the operating menu
Adjusting settings via the operating
menu
The main menu “Menu”
Adjusting the input sensitivity – “Sensitivity”
Adjustment range: 0 to –48 dB, adjustable in steps of 6 dB
The transmitter’s audio level display “AF”  always indicates the audio
level, even if the radio microphone is muted, e.g. allowing you to check the
adjusted sensitivity before live operation.
The following figures are a guide to the best settings:
Make use of the possibility to adjust settings via the operating
menu of your receiver and to transfer these settings to the radio
microphone. For more information, refer to the instruction
manual of the receiver. The relevant information is marked with
the sync icon.
For more detailed information on the operating menu, visit the
SKM 300 G3 product page at www.sennheiser.com.
Input sensitivity
adjusted ...
Effect/display
... too high Close talking distances, speakers with loud
voices or loud music passages cause over-
modulation in the transmission link.
The audio level display “AF”  shows full
deflection for the duration of the over-
modulation.
... correctly The audio level display “AF”  shows full
deflection only during the loudest passages.
... too low The transmission link is undermodulated. This
results in a signal with high background noise.
Transmission situation Sensitivity setting
Loud music/vocals −48 to −18 dB
Presentations −18 to −12 dB
Interviews −12 to 0 dB
Menu
–12 dB
Sensitivity
– 12 dB
Sensitivity
–36 dB
Sensitivity
“Stored”
Call up
“Sensitivity”
Select the desired
setting
Store the setting
MHz
543.200
B.Ch: 20.24
MUTE
P
AF
