Instruction manual

18
Adjusting settings via the operating menu
Selecting the frequency bank and the channel manually –
“Frequency Preset”
When you are in the “Frequency Preset” menu item, the RF signal is
deactivated.
Overview of the frequency banks and channels:
When setting up multi-channel systems, please observe the following:
Only the factory-preset frequencies within one frequency bank are inter-
modulation-free (see page 22). Radio microphone and receiver of a trans-
mission link have to be set to the same frequency. It is vital to observe the
notes on frequency selection on page 22.
Entering a name – “Name”
Via the “Name” menu, you can enter a freely selectable name (e.g. the
name of the performer) for the radio microphone.
The name can be displayed on the standard displays “Frequency/Name”
and “Channel/Name”. The name can consist of up to 8 characters such as:
• letters (without pronounciation marks),
•numbers from 0 to 9,
• special characters and spaces.
To enter a name, proceed as follows:
Activating/deactivating the automatic lock mode – “Auto Lock“
The lock mode prevents that the radio microphone is accidentally switched
off or programed during operation. The lock mode icon  on the
current standard display indicates that the lock mode is activated.
Frequency bank Channels Type
“1” to “20” up to 24 per
frequency bank
System bank:
frequencies are factory-preset
“U1” to “U6” up to 24 per
frequency bank
User bank:
frequencies are freely selectable
 Move the multi-function switch to select a character.
 Press the multi-function switch to change to the next
segment/character or to store the complete entry.
Menu
B.Ch:
5.14
Frequency Preset
B.Ch:
MHz
Frequency Preset
5.14
B.Ch:
MHz
Frequency Preset
1.14
Call up “Frequency
Preset”
Select the
frequency bank
and confirm
Select the channel;
store the setting
“Stored”
Call up “Name” Enter a character
and confirm
Enter a character;
store the setting
Menu
Lichael
Name
Name
Name
L ichael
Mi chael
“Stored”
Call up
“Auto Lock”
Select the desired
setting
Active
Auto Lock
Active
Auto Lock
Inactive
Auto Lock
Menu
Store the setting
“Stored”