Instruction manual

19
Adjusting settings via the operating menu
For information on how to use the lock mode, refer to page 12.
The extended menu “Advanced Menu”
Setting transmission frequencies and frequency banks – “Tune”
When you have selected one of the system banks and then select the
“Tune” menu, the radio microphone automatically switches to channel 1
of the frequency bank “U1”. In this case, “U1.1” briefly appears on the
display panel. Upon delivery, the channels of the frequency banks “U1” to
“U6” are not assigned a transmission frequency.
When you are in the “Tune” menu item, the RF signal is deactivated.
Via the “Tune” menu item, you can set a transmission frequency to be
stored in the current channel or you can select a different channel in one
of the frequency banks “U1” to “U6” and assign this channel a transmis-
sion frequency. It is vital to observe the notes on frequency selection on
page 22.
Setting a transmission frequency for the current channel
 Set the desired frequency.
Selecting a channel and assigning this channel a frequency
 Set the desired frequency bank and the desired channel.
 Set the desired frequency.
 Move the multi-function switch to select the desired setting
.
 Move the multi-function switch until the “Tune” menu item
appears.
 Press the multi-function switch
.
The frequency selection appears.
 Press the multi-function switch.
Your settings are stored.
You are back to the operating menu.
 Move the multi-function switch until the “Tune” menu item
appears.
 Press the multi-function switch until the frequency bank
selection appears.
 Press the multi-function switch.
The frequency selection appears.
Select the MHz
value and confirm
Select the kHz
value; store the
setting
543 .200 MHz
Tune
544.200 MHz
B.Ch: 20.1 B.Ch: 20.1
Tune
Call up “Tune”
Advanced Menu
Tune
“Stored”
543.200 MHz
Select the
frequency bank
and confirm
Select the channel;
store the setting
Tune
B.Ch: U1. 1 B.Ch: U1. 1
Tune
Call up “Tune”
(special function)
Advanced Menu
Tune
“Stored”
543.200 MHz