Users Manual

Using the EK 500 G4
67
Advanced -> Sync Settings menu item
In the Sync Settings menu item of the Advanced submenu, you can con-
figure the parameters to be sent to the transmitters and activate or deac-
tivate transmission The parameters are defined separately for the SK, SKM
and SKP.
You can activate/deactivate the following parameters:
•Sensitivity
•Auto Lock
•Mute Mode
•RF Power
• Phantom Power 48 V (only SKP 500 G4)
To configure a parameter and activate or deactivate transmission:
▷ Go to the parameter in question in the Advanced -> Sync Settings
menu.
▷ Press the SET button to open the sub-item.
▷ Press the UP and DOWN buttons to set the value.
▷ Press the SET button to save the setting.
▷ Press the UP and DOWN buttons to activate or deactivate the check
box.
When the check box is activated, the value will be transmitted during
synchronization. If it is deactivated, the value will not be transmitted.
▷ Press the SET button to save the setting.