Instruction Manual SKM 500 G3
Table Of Contents
- Important safety instructions
- The SKM 500 G3 radio microphone family
- Delivery includes
- Product overview
- Putting the radio microphone into operation
- Using the radio microphone
- Using the operating menu
- Adjusting settings via the operating menu
- Synchronizing the radio microphone with a receiver
- Cleaning the radio microphone
- Recommendations and tips
- If a problem occurs ...
- Accessories and spare parts
- Specifications
- Index
14
Using the radio microphone
Deactivating the lock mode temporarily
You can activate or deactivate the automatic lock mode via
the “Auto Lock” menu item (see page 22).
If the lock mode is activated, you have to temporarily deac-
tivate it In order to be able to operate the radio microphone:
The lock mode icon 햶 flashes prior to the lock mode being
activated again.
Deactivating the RF signal
Deactivating the RF signal on switch-on
For information on deactivating the RF signal on switch-on,
refer to the chapter “Switching the radio microphone on/
off” on page 13.
Deactivating the RF signal during operation
Proceed as described under “Switching the radio micro-
phone on/off” on page 12.
Press the multi-function switch.
“Locked“ appears on the display panel.
Move the multi-function switch.
“Unlock?” appears on the display panel.
Press the multi-function switch again.
The lock mode is temporarily deactivated.
How you are using the radio microphone deter-
mines how long the lock mode remains deacti-
vated:
When one of the standard displays is shown
on the display panel, briefly press the ON/
OFF button.
“RX Mute On?” appears on the display panel.
When you are in the operating menu
The lock mode remains deactivated until you
exit the operating menu.
When one of the standard displays is shown
The lock mode is automatically activated after
10 seconds.
MHz
542.625
ew500 G3
MUTE
P
AF
햶
ON/OFF