Instruction Manual SKM 500 G3
Table Of Contents
- Important safety instructions
- The SKM 500 G3 radio microphone family
- Delivery includes
- Product overview
- Putting the radio microphone into operation
- Using the radio microphone
- Using the operating menu
- Adjusting settings via the operating menu
- Synchronizing the radio microphone with a receiver
- Cleaning the radio microphone
- Recommendations and tips
- If a problem occurs ...
- Accessories and spare parts
- Specifications
- Index
20
Adjusting settings via the operating menu
Adjusting settings via the
operating menu
The main menu “Menu”
Adjusting the input sensitivity – “Sensitivity”
Adjustment range: 0 to −48 dB, adjustable in steps of 6 dB
Make use of the possibility to adjust settings via the
operating menu of your receiver and to transfer
these settings to the radio microphone.
For more information, refer to the instruction
manual of the receiver. The relevant information is
marked with the sync icon.
The audio level display “AF” 햲 always indicates the
audio level, even if the radio microphone is muted,
e.g. allowing you to check the adjusted sensitivity
before live operation.
Input sensitivity is
adjusted ...
Effect/display
... too high Close talking distances, speakers
with loud voices or loud music
passages cause overmodulation in
the transmission link. The audio level
display “AF” 햲 shows full deflection
for the duration of the overmodula-
tion.
... correctly The audio level display “AF” 햲
shows full deflection only during the
loudest passages.
... too low The transmission link is undermodu-
lated. This results in a signal with
high background noise.
Menu
–12 dB
Sensitivity
–12 dB
Sensitivity
–36 dB
Sensitivity
“Stored”
Call up
“Sensitivity”
Select the desired
setting
Store the setting
MHz
542.625
B.Ch: 20.30
MUTE
AF
P
햲