Instruction Manual SKM 500 G3

22
Adjusting settings via the operating menu
The name can be displayed on the standard displays
“Frequency/Name” and “Name/Frequency bank/Channel”.
The name can consist of up to 8 characters such as:
• letters (without pronounciation marks),
• numbers from 0 to 9,
• special characters and spaces.
To enter a name, proceed as follows:
Activating/deactivating the automatic lock mode –
“Auto Lock“
The lock mode prevents that the radio microphone is acci-
dentally switched off or programed during operation.
The lock mode icon 햶 on the current standard display
indicates that the lock mode is activated.
For information on how to use the lock mode, refer to
page 14.
The extended menu “Advanced Menu”
Setting transmission frequencies and frequency banks –
“Tune”
Via the “Tune” menu item, you can set a transmission
frequency to be stored in the current channel or you can
select a different channel in one of the frequency banks
“U1” to “U6” and assign this channel a transmission
frequency.
 Move the multi-function switch to select a
character.
 Press the multi-function switch to change to the
next segment/character or to store the complete
entry.
 Move the multi-function switch to select the
desired setting
.
When you have selected one of the system banks
and then select the “Tune” menu, the radio micro-
phone automatically switches to channel 1 of the
frequency bank “U1”. In this case, “U1.1” briefly
appears on the display panel.
Upon delivery, the channels of the frequency banks
“U1” to “U6” are not assigned a transmission
frequency.
When you are in the “Tune” menu item, the
RF signal is deactivated.
Active
Auto Lock
Active
Auto Lock
Inactive
Auto Lock
Menu
“Stored”
Call up “Auto
Lock”
Select the desired
setting
Store the setting