Instruction Manual SKM 500 G3

24
Adjusting settings via the operating menu
Adjusting the transmission power – “RF Power”
Via the “RF Power” menu item, you can adjust the transmis-
sion power in two steps.
Activating/deactivating the pilot tone transmission –
“Pilot Tone”
The radio microphone adds an inaudible signal, known as
the pilot tone, to the transmitted signal. The receiver
detects and evaluates the pilot tone.
The pilot tone supports the receiver’s squelch function
(Squelch) and protects against interference due to
RF signals from other devices.
Devices of the ew 500 G1 series (generation 1) do not
support the pilot tone function. Therefore, please observe
the following when combining a radio microphone or
receiver of the ew 500 G3 series (generation 3) with
devices from an earlier evolution wireless generation:
Adjusting the contrast of the display panel –
“LCD Contrast“
You can adjust the contrast of the display panel in 16 steps.
It is vital to observe the notes on the supplied
frequency information sheet.
Radio
microphone
Receiver Make sure to ...
w G3/ w G2 w G3/ w G2 ... activate the pilot
tone function on both
radio microphone and
receiver.
w G3 w G1 ... deactivate the pilot
tone function on the
ew 500 G3 radio
microphone.
w G1 w G3 ... deactivate the pilot
tone function on the
ew 500 G3 receiver.
Advanced Menu
RF Power
Standard
RF Power
Low
RF Power
“Stored”
Call up
“RF Power”
Select the desired
setting
Store the setting
Name
Advanced Menu
Pilot Tone
Active
Pilot Tone
Inactive
Pilot Tone
“Stored”
Call up
“Pilot Tone”
Select the desired
setting
Store the setting