Instruction Manual SKM 500 G3
Table Of Contents
- Important safety instructions
- The SKM 500 G3 radio microphone family
- Delivery includes
- Product overview
- Putting the radio microphone into operation
- Using the radio microphone
- Using the operating menu
- Adjusting settings via the operating menu
- Synchronizing the radio microphone with a receiver
- Cleaning the radio microphone
- Recommendations and tips
- If a problem occurs ...
- Accessories and spare parts
- Specifications
- Index
25
Adjusting settings via the operating menu
Resetting the settings made in the operating menu –
“Reset”
When resetting the settings made in the operating menu,
only the selected settings for the pilot tone and for the
frequency banks “U1” to “U6” remain unchanged.
For an overview of the factory-preset default settings, refer
to the supplied frequency information sheet.
Displaying the software revision – “Software Revision”
You can display the current software revision of the radio
microphone.
For information on software updates, visit the
SKM 500 G3 product page at www.sennheiser.com.
Select the desired
setting; apply the
setting
Call up “Reset”
Advanced
Menu
Reset Yes
Reset
“Stored”