Instruction Manual SKM 500 G3

27
Cleaning the radio microphone
Cleaning the radio microphone
 Use a cloth to clean the radio microphone from time to
time.
 Do not use any solvents or cleansing agents.
To clean the sound inlet basket of the microphone head
(MMD 935-1, MMD 945-1):
 Unscrew the upper sound inlet basket from the
microphone head by turning it counterclockwise (see
diagram).
 Remove the foam insert.
 To clean the sound inlet basket:
– Use a cloth to clean the upper sound inlet basket from
the inside and outside.
OR
– Scrub with a brush and rinse with clear water.
 If necessary, clean the foam insert with a mild detergent
or replace the foam insert.
 Dry the upper sound inlet basket.
 Dry the foam insert.
 Reinsert the foam insert.
 Replace the sound inlet basket on the microphone head
and screw it tight.
You should also clean the contact rings of the microphone
head from time to time:
 Wipe the contact rings of the microphone head with a
cloth.
CAUTION! Liquids can damage the electronics of the
radio microphone!
Liquids entering the housing of the device
can cause a short-circuit and damage the
electronics.
 Keep all liquids away from the radio micro-
phone.
CAUTION! Liquids will damage the microphone module!
Liquids will damage the microphone module.
 Only clean the upper sound inlet basket.
For information on cleaning the MMK 965-1 micro-
phone head, refer to its instruction manual.