Instruction manual Digital 9000 System

Preparing the Digital 9000 system for use
46 | Digital 9000
Preparing the L 60 charger for use
Cascading several chargers
Up to 4 L 60 charger can be cascaded together and can be powered by the
NT 3-1 mains unit.
왘 Prepare the L 60 chargers:
– Make sure that the chargers are disconnected from the mains.
–
Unscrew the two screws
6 at the bottom of one charger.
– Til
t the charger to the side and slide out the rails 5 completely.
– Tighten the two screws 6.
왘 Unscrew the two sc
rews 7 at the bottom of a second charger.
왘 Slide th
e second charger onto the rails 5 of the first charger and
tighten the two screws7.
왘 Repeat
for the other chargers.
Setting up or mounting the charger
CAUTION
Risk of staining of surfaces!
Surfaces can be tr
eated with varnish, polish or synthetics which might
cause stains when they come into contact with other materials. Despite a
thorough testing of the materials used by us, we cannot rule out the pos-
sibility of staining.
왘 Do not place the L 60 charger on delicate surfaces.
7
6
5