Instruction manual Digital 9000 System
Table Of Contents
- Digital_9000_Manual_06_2017_EN
- Important safety instructions
- Digital 9000 – System overview
- Delivery includes
- EM 9046 receiver
- EM 9046 CAB cable set
- Antennas and antenna boosters
- GZL 9000 antenna cables
- SKM 9000/SKM 9000 COM radio microphone
- Microphone heads for the SKM 9000 radio microphone
- SK 9000 bodypack transmitter
- Microphones for the SK 9000 bodypack transmitter
- KA 9000 COM command adapter for the SK 9000 bodypack transmitter
- CI 1-4 line/instrument cable for the SK 9000 bodypack transmitter
- B 60/B 61 battery packs
- BA 60/BA 61 accupack
- L 60 charger
- Product overview
- EM 9046 receiver
- Antennas and antenna boosters
- GZL 9000 antenna cable
- SKM 9000/SKM 9000 COM radio microphone
- SK 9000 bodypack transmitter
- KA 9000 COM command adapter for the SK 9000 bodypack transmitter
- BA 60 accupack
- BA 61 accupack
- B 60 battery pack
- B 61 battery pack
- L 60 charger
- Preparing the EM 9046 receiver for use
- Preparing the A/AB/AD 9000 antennas and/or antenna boosters for use
- Preparing the SKM 9000 radio microphone for use
- Preparing the SK 9000 bodypack transmitter for use
- Preparing the L 60 charger for use
- Cascading several chargers
- Setting up or mounting the charger
- Preparing the Digital 9000 system for use
- Using the EM 9046
- Using the SKM 9000
- Using the SK 9000
- Using the L 60
- Cleaning and maintaining the Digital 9000 system
- If a problem occurs ...
- Specifications
Using the SKM 9000
86 | Digital 9000
Using the SKM 9000
Switching the SKM 9000 on/off
To switch the SKM 9000 on:
왘 Keep the ON/OFF button B pressed until the Sennheiser logo
appears on the display panel 5.
The ON/OFF button B is backlit in blue and the standard display
(here: “Frequency”, see page 90) appears on the display panel 5. The
radio microp
hone transmits an RF signal and the transmission mode
display “HD”/“LR” lights up constantly:
To sw
itch the SKM 9000 off:
왘 Keep
the ON/OFF button B pressed until the display panel goes off.
왘 Remove the accupack/battery pack when the radio microphone will not
be used for extended periods of time (see page 40).
To switch the SKM 9000 off with the lock mode activated:
왘 Press t
he ON/OFF button B while the standard display is shown.
“LOCK” appears on the display panel because the lock mode is activated.
왘 Press
the UP button or the DOWN button .
“UNLOCK” appears on the display panel.
왘 Press
th
e SET button .
The lock mode is temporarily deactivated, the lock mode icon 5 flashes.
왘 Within the next 2 seconds, press the ON/OFF button B and keep it
pressed until the display panel goes off.
왘 If you switch on the SKM 9000, the lock mode is activated again.
Before using your radio microphone, ask the relevant wireless regu-
latory authority for the exact frequency allocations and apply for an
individual license if necessary.
The supplied supplement “Framework requirements and restrictions
on frequency usage in Europe” provides an overview of the different
European framework requirements and restrictions on frequency
usage. If there is no entry in the supplement, ask the relevant wire-
less regulatory authority for the current rules governing frequency
usage.
When the SKM 9000 is switched on for the first time, it contains the
first frequency preset of the transmitter frequency range (e.g. A1.1:
470.200 MHz). Via the “ch” menu of the EM 9046 receiver, set the
desired frequency preset and adjust the settings of other menu
items and then synchronize the transmitter and the receiver (see
page 77). In doing so, all frequency presets of the transmitter fre-
quency range will be transfered to the SKM 9000.
We recommend you to always adjust the transmitter settings via
the EM 9046 receiver and then to synchronize the transmitter and
the receiver.
B
3:59
480.000
3:59
480.000