Instruction manual SKM 9000
Table Of Contents
Cleaning and maintaining the SKM 9000
16 | SKM 9000
“Test tone” – Activating the 1 kHz test tone
Via the “Test tone” menu item, you can activate a 1 kHz test tone.
This test tone is transmitted instead of the input signal. You can use
this function for level matching your system or for the walk test.
“Reset” – Resetting the factory default settings
Via the “Reset” menu item, you can reset the radio microphone to
its factory default settings.
“Information” – Displaying the firmware version and
frequency range
Via the “Information” menu item, you can display the firmware
version and the transmitter’s frequency range.
Cleaning and maintaining the SKM 9000
왘 Remove the rechargeable batteries or batteries before cleaning.
왘 Only use a soft, dry cloth to clean the radio microphone.
Cleaning the sound inlet basket of the microphone head
왘 Unscrew the upper sound inlet basket from the microphone
head by turning it counterclockwise (see diagram).
왘 Remove
the foam insert.
CAUTION!
Liquids can damage the electronics of the devices!
Liquids entering the housing of the devices can cause a short-circuit
and damage the electronics.
왘 Keep all liquids away from the devices.
왘 Do not use any solvents or cleansing agents.