Instruction manual SpeechLine Digital Wireless

ManualsBrandsSennheiser ManualsAudio EquipmentSL Bodypack DW

Table Of Contents

SpeechLine Digital Wireless: System Information
Focus on the spoken word
- SpeechLine Digital Wireless – the professional solution for speakers, lecturers and presenters
- Typical applications
- What are the features of SpeechLine Digital Wireless?
The Products of the SpeechLine Digital Wireless Series
- The SL Rack Receiver DW receiver
- SL Multi-Channel Receiver DW
- The handheld transmitter
- The bodypack transmitter
- The wireless SL Tablestand 133-S DW
- The wireless SL Tablestand 153-S DW
- The wireless SL Boundary 114-S DW
- The CHG 2 charger
- The CHG 4N charger
- The CHG 2W charging base
Accessories
- The clip-on and headset microphones
- The AWM 2 antenna wall mount
- The AWM 4 antenna wall mount
- The SL PASC 2 passive antenna splitter
- The SL PASC 4 passive antenna splitter
- Antenna cables
SpeechLine Digital Wireless: System planning
Planning
- Country-Specific Variants
- Number and size of the rooms
- Shared use of the 1.9 GHZ frequency band
- Analysis of the environmental conditions
Recommendations on antenna mounting
- Antenna setup and planning for SpeechLine Digital Wireless
- Antenna mounting options
- Option 1: Connecting the AWM 2 or AWM 4 antenna wall mount directly to the receiver(s)
- Option 2: Combining multiple links to one AWM 2/AWM 4
- Option 3: Rack mounting - front
- Option 4: Rack mounting - rear
- Further important information on antenna usage
Multi-room mode
SpeechLine Digital Wireless: Instruction manual
SL Rack Receiver DW
- Product overview and operating elements – front panel
- Product overview and connections – rear panel
- Connecting the receiver
- Controlling and monitoring the receiver via the network
- Updating the firmware
- Setting up the receiver
- Installing receivers in a rack
- Displays on the receiver’s display panel
- Using the operating menu of the receiver
SL MCR DW
- Product overview and operating elements
- Directivity of the integrated antennas
- Connecting the receiver
- Mounting the receiver
- Putting the receiver into operation
- Controlling and monitoring the receiver via the network
- Meaning of the status LEDs
- Updating the firmware
The SL Handheld DW
- Product overview
- Displays on the display panel of the SL Handheld DW
- Starting up and using the handheld transmitter
- Updating the firmware
The SL Bodypack DW
- Product overview
- Displays on the display panel of the SL Bodypack DW
- Starting up and using the bodypack transmitter
- Updating the firmware
The SL Tablestand 133-S DW
- Product overview
- Starting up and using the table stand
- Updating the firmware
The SL Tablestand 153-S DW
- Product overview
- Starting up and using the table stand
- Updating the firmware
The SL Boundary 114-S DW
- Product overview
- Starting up and using the boundary microphone
- Updating the firmware
Pairing
- Identifying paired devices
- Pairing a receiver with a transmitter
Performing a walk test (reception quality)
The SL Headmic 1 headset microphone
- Preparing the SL Headmic 1 for use
- Changing the microphone position (left/right)
- Adjusting the microphone boom and the neckband
- Using the frequency response caps
- Using the windshield
- Attaching the connection cable to clothing
- Connecting the SL Headmic 1 to the SL Bodypack DW
The MKE 1 clip-on microphone
- Treble boost
- Attaching the microphone
- Connecting the MKE 1 to the SL Bodypack DW
The CHG 2 charger
- Product overview
- Connecting the CHG 2 charger to the power supply system
- Charging the accupack in the CHG 2 charger
The CHG 4N charger
- Product overview
- Connecting the CHG 4N charger to the power supply system
- Charging the accupack in the CHG 4N charger
- Meaning of the charging slot status LEDs
- Controlling and monitoring the CHG 4N charger over the network
- Updating the firmware
The CHG 2W charging base
- Product overview
- Connecting the CHG 2W charging base to the power supply system
- Charging a device using the CHG 2W charging base
- Meaning of the status LEDs on the charging surfaces
The AWM 2 antenna wall mount
- Product overview
- Connecting and mounting the AWM 2
The AWM 4 antenna wall mount
- Product overview
- Connecting and mounting the AWM 4
The SL PASC 2 passive antenna splitter/ combiner
- Connectors on the rear of the device
The SL PASC 4 passive antenna splitter/ combiner
- Connectors on the rear of the device
- Installing antenna splitters in a rack

Recommendations on antenna mounting

▷ When using multiple AWM 2/AWM 4 antenna wall mounts,

make sure that the distances between all antennas are

equal:

►

▷ If possible, position the antennas so that there is a direct

line of sight (without obstacles) between the transmitters

and the antennas.

►