Instruction manual SpeechLine Digital Wireless
Table Of Contents
- SpeechLine Digital Wireless: System Information
- Focus on the spoken word
- The Products of the SpeechLine Digital Wireless Series
- Accessories
- SpeechLine Digital Wireless: System planning
- Planning
- Recommendations on antenna mounting
- Antenna setup and planning for SpeechLine Digital Wireless
- Antenna mounting options
- Option 1: Connecting the AWM 2 or AWM 4 antenna wall mount directly to the receiver(s)
- Option 2: Combining multiple links to one AWM 2/AWM 4
- Option 3: Rack mounting - front
- Option 4: Rack mounting - rear
- Further important information on antenna usage
- Multi-room mode
- SpeechLine Digital Wireless: Instruction manual
- SL Rack Receiver DW
- Product overview and operating elements – front panel
- Product overview and connections – rear panel
- Connecting the receiver
- Controlling and monitoring the receiver via the network
- Updating the firmware
- Setting up the receiver
- Installing receivers in a rack
- Displays on the receiver’s display panel
- Using the operating menu of the receiver
- SL MCR DW
- The SL Handheld DW
- The SL Bodypack DW
- The SL Tablestand 133-S DW
- The SL Tablestand 153-S DW
- The SL Boundary 114-S DW
- Pairing
- Performing a walk test (reception quality)
- The SL Headmic 1 headset microphone
- The MKE 1 clip-on microphone
- The CHG 2 charger
- The CHG 4N charger
- The CHG 2W charging base
- The AWM 2 antenna wall mount
- The AWM 4 antenna wall mount
- The SL PASC 2 passive antenna splitter/ combiner
- The SL PASC 4 passive antenna splitter/ combiner
SL Rack Receiver DW
82
Displays on the receiver’s display panel
Home screen
The home screen appears automatically after switch-on or
when no button has been pressed on the receiver for a long pe-
riod of time.
If there is no radio link between the receiver and a transmitter,
No Link appears on the display panel and the display bright-
ness is automatically dimmed.
►
1 Selected sound profile
• Displays the name of the selected sound profile. If no
sound profile is selected, nothing is displayed here.
2 MUTE status display
The received transmitter is not muted, but can be
muted at any time.
The received transmitter is muted. In addition, the
status LED lights up yellow.
The received transmitter cannot be muted because
its MUTE switch is deactivated. See „The System Set-
tings menu“.
3 Audio level display
• The audio level is automatically adjusted.
4 Secondary home screen
• The secondary home screen appears when you turn the
jog dial to the left.
• The above shown home screen appears again after 10
seconds or when you turn the jog dial to the right.