Instruction manual SpeechLine Digital Wireless
Table Of Contents
- SpeechLine Digital Wireless: System Information
- Focus on the spoken word
- The Products of the SpeechLine Digital Wireless Series
- Accessories
- SpeechLine Digital Wireless: System planning
- Planning
- Recommendations on antenna mounting
- Antenna setup and planning for SpeechLine Digital Wireless
- Antenna mounting options
- Option 1: Connecting the AWM 2 or AWM 4 antenna wall mount directly to the receiver(s)
- Option 2: Combining multiple links to one AWM 2/AWM 4
- Option 3: Rack mounting - front
- Option 4: Rack mounting - rear
- Further important information on antenna usage
- Multi-room mode
- SpeechLine Digital Wireless: Instruction manual
- SL Rack Receiver DW
- Product overview and operating elements – front panel
- Product overview and connections – rear panel
- Connecting the receiver
- Controlling and monitoring the receiver via the network
- Updating the firmware
- Setting up the receiver
- Installing receivers in a rack
- Displays on the receiver’s display panel
- Using the operating menu of the receiver
- SL MCR DW
- The SL Handheld DW
- The SL Bodypack DW
- The SL Tablestand 133-S DW
- The SL Tablestand 153-S DW
- The SL Boundary 114-S DW
- Pairing
- Performing a walk test (reception quality)
- The SL Headmic 1 headset microphone
- The MKE 1 clip-on microphone
- The CHG 2 charger
- The CHG 4N charger
- The CHG 2W charging base
- The AWM 2 antenna wall mount
- The AWM 4 antenna wall mount
- The SL PASC 2 passive antenna splitter/ combiner
- The SL PASC 4 passive antenna splitter/ combiner
SL MCR DW
111
A channel's LED is yellow
▷ The received transmitter has been muted with the MUTE
switch.
A channel's LED is flashing yellow
▷ The received transmitter is performing a firmware update.
See „Updating the firmware“.
A channel's LED is red
▷ No radio link to a transmitter.
A channel's LED is flashing red
▷ An error has occurred in this channel. Details are shown in
the Control Cockpit.
or
▷ An error occurred while updating the transmitter firmware.
Details are shown in the Control Cockpit.
A channel's LED flashes red and green in alternation
▷ Pairing mode is active for this channel.
See „Pairing“.
Updating the firmware
The firmware of the receiver and the received transmitter is
updated using the Sennheiser Control Cockpit software.
You can find more information about this procedure in the
software help within the software itself or from the Sennheis-
er Documentation app or the download area of the Sennhe-
iser website.
The Sennheiser Control Cockpit software help