Instruction manual SpeechLine Digital Wireless
Table Of Contents
- SpeechLine Digital Wireless: System Information
- Focus on the spoken word
- The Products of the SpeechLine Digital Wireless Series
- Accessories
- SpeechLine Digital Wireless: System planning
- Planning
- Recommendations on antenna mounting
- Antenna setup and planning for SpeechLine Digital Wireless
- Antenna mounting options
- Option 1: Connecting the AWM 2 or AWM 4 antenna wall mount directly to the receiver(s)
- Option 2: Combining multiple links to one AWM 2/AWM 4
- Option 3: Rack mounting - front
- Option 4: Rack mounting - rear
- Further important information on antenna usage
- Multi-room mode
- SpeechLine Digital Wireless: Instruction manual
- SL Rack Receiver DW
- Product overview and operating elements – front panel
- Product overview and connections – rear panel
- Connecting the receiver
- Controlling and monitoring the receiver via the network
- Updating the firmware
- Setting up the receiver
- Installing receivers in a rack
- Displays on the receiver’s display panel
- Using the operating menu of the receiver
- SL MCR DW
- The SL Handheld DW
- The SL Bodypack DW
- The SL Tablestand 133-S DW
- The SL Tablestand 153-S DW
- The SL Boundary 114-S DW
- Pairing
- Performing a walk test (reception quality)
- The SL Headmic 1 headset microphone
- The MKE 1 clip-on microphone
- The CHG 2 charger
- The CHG 4N charger
- The CHG 2W charging base
- The AWM 2 antenna wall mount
- The AWM 4 antenna wall mount
- The SL PASC 2 passive antenna splitter/ combiner
- The SL PASC 4 passive antenna splitter/ combiner
The SL PASC 4 passive antenna splitter/combiner
210
The SL PASC 4 passive antenna splitter/
combiner
The SL PASC 4 is a passive four-way true diversity antenna
splitter/combiner for the SpeechLine Digital Wireless micro-
phone series. It is used to distribute the antenna signals from
up to 4 SpeechLine Digital Wireless radio links. In combination
with the AWM 2 or AWM 4 remote antennas, the number of re-
quired antenna cables is reduced to a minimum. The rack re-
ceivers are connected to the SL PASC 4 using the supplied
SMA-R cables.
Return to first page of the instruction manual
Connectors on the rear of the device
Product overview – SL PASC 4 rear panel
►
1 R-SMA output sockets ANT I and ANT II
• for connecting the antennas (AWM 2 or AWM 4)
2 R-SMA input sockets SL RACK RECEIVER DW ANTENNA I
and SL RACK RECEIVER DW ANTENNA II
• for connecting the receivers
You can find more information on wiring in the chap-
ter „Option 2: Combining multiple links to one AWM
2/AWM 4“.