Product specification Dante™ Kit ME 36

PRODUCT SPECIFICATION 2/6
Dante™ Kit ME 36
SPECIFICATIONS
SL DI 4 XLR
MAT 133-S
Phantom power P24
Current consumption 3.7 mA
Connectors Mic In - XLR-3F
Mic Out - XLR-3M
Pin assignment out XLR-3M out:
1 = gnd
2 = Audio +
3 = Audio –
Pin assignment in XLR-3F in:
1 = gnd
2 = Audio +
3 = Audio –
LED light ring color red/green
Microphone modes Toggle on / off
Push to mute
Push to talk
permanent on
Connection clip contact for logic
Pin assignment logic
connector
trigger signal at the logic
connector:
Logic in (external
LED control)
GND
Logic out
(switch signal)
Weight 1,210 g
Dimensions (W x D x H) 120 x 170 x 43 mm
(4.72" x 6.69" x 1.69")
Operating temperature -10 °C to +50 °C
(+14 °F to +122 °F)
Audio Inputs
Input type Balanced and RF filtered
Gain 0 dB, +15 dB, + 30 dB, +45 dB,
software selectable
10 dB pad, software selectable
Input impedance > 1.8 KΩ @ any gain
Maximum input
levels
+18 dBu @ 0 dB gain, with pad
+8 dBu @ 0 dB gain, no pad
-7 dBu @ +15 dB gain, no pad
-22 dBu @ +30 dB gain, no pad
-36 dBu @ +45 dB gain, no pad
Phantom power +48 V, 10 mA per input, software
selectable
Audio performance
EIN -113 dBu
System THD+N < 0.02 % @ any gain
input signal 3 dB below maximum
Frequency response 20 Hz - 20 kHz
Dante™ network
Physical level Standard Ethernet
Connector Single RJ-45
Cable quality CAT-5
Transmission speed 100 Mbps
Daisy chain 2 units when powered by 802.3af
PoE
3 units when powered by ex-
ternal +12 V DC power supply
(Sennheiser NT 12-50CS)
Product properties
Power requirements Class 0 802.3af PoE PD compliant
+12 V DC
Power consumption 2.7 W (225 mA) @ +12 V DC, no
phantom power
5.5 W (460 mA) @ +12 V DC,
10 mA phantom power load per
input
Dimensions (W x H
x D)
219 x 38 x 120 mm
(8.63" x 1.50" x 4.74")
Weight 0.77 kg (1.7 lbs)
Operating tempera-
ture
0 °C - 40 °C
(32 °F - 104 °F)