Product specification Dante™ Kit MEB 114-S

ManualsBrandsSennheiser ManualsAudio EquipmentSL DI 4 XLR

PRODUCT SPECIFICATION 1/6

Dante™ Kit MEB 114-S

The MEB 114-S is a sturdy on-table boundary layer microphone that constitutes an improvement for any conferencing

system. It features a programmable microphone button and a bi-color LED ring for status indication.

Thanks to its rugged housing and its high-quality microphone capsule the MEB 114-S ensures the best speech intelligibili-

ty.

The SL DI 4 XLR four input Dante™ preamp is the ideal interface for wireless microphone receivers. As analog to digital

audio converter, it allows for adding analog microphone systems to a Dante™ system. All Sennheiser XLR microphones

and all wireless microphone receivers as well as all SpeechLine Wired installation microphones are compatible with the

SL DI 4 XLR.

FEATURES

• Great speech intelligibility

• Phantom power via PoE

• Remote controllable gain level

• Daisy-chaining possible

DELIVERY INCLUDES

• 1 SL DI 4 XLR Dante™ interface

• 4 MEB 114-S boundary layer microphones

PRODUCT VARIANTS

Dante Kit MEB 114-S Art. no. 508207

Summary of content (6 pages)

PAGE 1
PRODUCT SPECIFICATION 1/6 Dante™ Kit MEB 114-S FEATURES DELIVERY INCLUDES • Great speech intelligibility • 1 SL DI 4 XLR Dante™ interface • 4 MEB 114-S boundary layer microphones • Phantom power via PoE • Remote controllable gain level • Daisy-chaining possible The MEB 114-S is a sturdy on-table boundary layer microphone that constitutes an improvement for any conferencing system. It features a programmable microphone button and a bi-color LED ring for status indication.
PAGE 2
PRODUCT SPECIFICATION 2/6 Dante™ Kit MEB 114-S SPECIFICATIONS SL DI 4 XLR Audio Inputs Dante™ network Input type Balanced and RF filtered Physical level Standard Ethernet Gain 0 dB, +15 dB, + 30 dB, +45 dB, software selectable 10 dB pad, software selectable Connector Single RJ-45 Cable quality CAT-5 Transmission speed 100 Mbps Daisy chain 2 units when powered by 802.3af PoE 3 units when powered by external +12 V DC power supply (Sennheiser NT 12-50CS) Input impedance > 1.
PAGE 3
PRODUCT SPECIFICATION Dante™ Kit MEB 114-S POLAR DIAGRAM MEB 114-S 0° 330° 30° 300° 60° 90° 270° 240° 120° 125 Hz 250 Hz 500 Hz 1000 Hz 210° 150° 180° MEB 114 MEB 114-S FREQUENCY RESPONSE MEB 114-S 2000 Hz 4000 Hz 8000 Hz 16000 Hz 3/6
PAGE 4
PRODUCT SPECIFICATION 4/6 Dante™ Kit MEB 114-S DIMENSIONS SL DI 4 XLR 26.01 1.024" 205.23 8.080" 119.81 4.717" 5.74 0.226" 0.56 0.022" RJ 45 11.44 0.450" XLR 3 DC POWER JACK XLR 3 POWER LINK IN 4 19.28 0.759" IN 3 IN 2 IN 1 20.42 0.804" OUT DC IN 12V 500mA IN DATA POE + DATA PWR LINK 22.78 0.897" 19.56 0.770" 24.13 0.950" 34.19 1.346" 24.13 0.950" 24.13 0.950" 21.94 0.864" 51.61 2.032" 219.25 8.632" SL DI 4 XLR IN 4 IN 3 39.01 1.
PAGE 5
PRODUCT SPECIFICATION 5/6 Dante™ Kit MEB 114-S DIMENSIONS MEB 114-S Logic Out Buchse Logic out jack Lowcutfilter Schiebeschalter Low cut filter switch Modi Schiebeschalter Modi switch Mini XLR 3
PAGE 6
PRODUCT SPECIFICATION 6/6 Dante™ Kit MEB 114-S ARCHITECT‘S SPECIFICATION The Dante™ interface shall feature four balanced and RF filtered mic/line inputs on female XLR-3 connectors and two RJ-45 Ethernet connectors to allow Dante™ daisy chaining (DDC) of multiple units. Audio frequency response shall range from 20 – 20,000 Hz. Input impedance shall be > 1.8 kΩ at any gain setting. Equivalent input noise shall be -113 dBu. The Dante™ interface shall be powered over the CAT5 Ethernet cable from an 802.