User's Manual
The CHG 4N charger
137
If you wish to do this, you must temporarily reconfigure the host PC on
which the Sennheiser Control Cockpit is installed to automatic IP assign-
ment.
If the CHG 4N charger is visible in the Sennheiser Control Cockpit, you
can do the IP configuration manually:
▷ Change the IP settings under Device Details -> Network in the Senn-
heiser Control Cockpit.
Connecting a pre-configured CHG 4N charger to the Sennheiser Control
Cockpit
If mDNS is activated (factory setting), the CHG 4N charger is automatically
detected in the network.
If the charger has been reconfigured according to one of the procedures
described above and mDNS has been deactivated, you can add the charger
manually using the Add Device function in the Sennheiser Control Cock-
pit.
To add the charger in the Sennheiser Control Cockpit:
▷ Use the Add Device function in the Sennheiser Control Cockpit and
enter the pre-configured IP address.