Instruction manual SpeechLine Digital Wireless
Table Of Contents
- SpeechLine Digital Wireless: System Information
- Focus on the spoken word
- The Products of the SpeechLine Digital Wireless Series
- Accessories
- SpeechLine Digital Wireless: System planning
- Planning
- Recommendations on antenna mounting
- Antenna setup and planning for SpeechLine Digital Wireless
- Antenna mounting options
- Option 1: Connecting the AWM 2 or AWM 4 antenna wall mount directly to the receiver(s)
- Option 2: Combining multiple links to one AWM 2/AWM 4
- Option 3: Rack mounting - front
- Option 4: Rack mounting - rear
- Further important information on antenna usage
- Multi-room mode
- SpeechLine Digital Wireless: Instruction manual
- SL Rack Receiver DW
- Product overview and operating elements – front panel
- Product overview and connections – rear panel
- Connecting the receiver
- Controlling and monitoring the receiver via the network
- Updating the firmware
- Setting up the receiver
- Installing receivers in a rack
- Displays on the receiver’s display panel
- Using the operating menu of the receiver
- SL MCR DW
- The SL Handheld DW
- The SL Bodypack DW
- The SL Tablestand 133-S DW
- The SL Tablestand 153-S DW
- The SL Boundary 114-S DW
- Pairing
- Performing a walk test (reception quality)
- The SL Headmic 1 headset microphone
- The MKE 1 clip-on microphone
- The CHG 2 charger
- The CHG 4N charger
- The CHG 2W charging base
- The AWM 2 antenna wall mount
- The AWM 4 antenna wall mount
- The SL PASC 2 passive antenna splitter/ combiner
- The SL PASC 4 passive antenna splitter/ combiner
SL MCR DW
105
Mounting the receiver on a stand
The thread in the middle of the mounting frame is suitable for
mounting on a standard microphone stand with boom arm and
3/8" thread.
▷ Screw the mounting frame onto the microphone stand as
shown.
▷ Insert the receiver into the mounting frame as shown until
you hear it click into place.
CAUTION
Danger from falling objects
If you mount the receiver improperly on the stand, the
stand and receiver may tip over. This can cause personal injury
and damage to property.
▷ Use a stand that is designed for a central load of 5 kg.
▷ Adjust the length of the boom arm as short as possible, as
shown in the figure.
▷ Set the height of the stand to a maximum of 2 meters.
▷ Make sure that the total weight of the stand and the mount-
ed receiver does not exceed 7 kg.