Instruction manual SpeechLine Digital Wireless
Table Of Contents
- SpeechLine Digital Wireless: System Information
- Focus on the spoken word
- The Products of the SpeechLine Digital Wireless Series
- Accessories
- SpeechLine Digital Wireless: System planning
- Planning
- Recommendations on antenna mounting
- Antenna setup and planning for SpeechLine Digital Wireless
- Antenna mounting options
- Option 1: Connecting the AWM 2 or AWM 4 antenna wall mount directly to the receiver(s)
- Option 2: Combining multiple links to one AWM 2/AWM 4
- Option 3: Rack mounting - front
- Option 4: Rack mounting - rear
- Further important information on antenna usage
- Multi-room mode
- SpeechLine Digital Wireless: Instruction manual
- SL Rack Receiver DW
- Product overview and operating elements – front panel
- Product overview and connections – rear panel
- Connecting the receiver
- Controlling and monitoring the receiver via the network
- Updating the firmware
- Setting up the receiver
- Installing receivers in a rack
- Displays on the receiver’s display panel
- Using the operating menu of the receiver
- SL MCR DW
- The SL Handheld DW
- The SL Bodypack DW
- The SL Tablestand 133-S DW
- The SL Tablestand 153-S DW
- The SL Boundary 114-S DW
- Pairing
- Performing a walk test (reception quality)
- The SL Headmic 1 headset microphone
- The MKE 1 clip-on microphone
- The CHG 2 charger
- The CHG 4N charger
- The CHG 2W charging base
- The AWM 2 antenna wall mount
- The AWM 4 antenna wall mount
- The SL PASC 2 passive antenna splitter/ combiner
- The SL PASC 4 passive antenna splitter/ combiner
The SL Boundary 114-S DW
155
Charging the boundary microphone with a wireless
Qi charging base from a third-party manufacturer
You can charge the SL Boundary 114-S DW with any charging
base that uses the wireless Qi charging standard. Place the
boundary microphone on the third-party Qi charging base. The
alignment LED lights up green once the table stand is correctly
positioned.
You can find more information about third-party Qi charging
bases in the documentation from the respective manufactur-
ers.
Meaning of the charge level LEDs on the boundary
microphone
The charge level LEDs indicate the charge level of the SL
Boundary 114-S DW. At 100 % charge, the SL Boundary 114-S
DW has an operating time of about 10 hours.
Switching the boundary microphone on/off
To switch the boundary microphone on:
►
▷ Press the ON/OFF button for 1 second.
To switch the boundary microphone off:
▷ Press the ON/OFF button for 3 seconds.