Instruction manual SpeechLine Digital Wireless
Table Of Contents
- SpeechLine Digital Wireless: System Information
- Focus on the spoken word
- The Products of the SpeechLine Digital Wireless Series
- Accessories
- SpeechLine Digital Wireless: System planning
- Planning
- Recommendations on antenna mounting
- Antenna setup and planning for SpeechLine Digital Wireless
- Antenna mounting options
- Option 1: Connecting the AWM 2 or AWM 4 antenna wall mount directly to the receiver(s)
- Option 2: Combining multiple links to one AWM 2/AWM 4
- Option 3: Rack mounting - front
- Option 4: Rack mounting - rear
- Further important information on antenna usage
- Multi-room mode
- SpeechLine Digital Wireless: Instruction manual
- SL Rack Receiver DW
- Product overview and operating elements – front panel
- Product overview and connections – rear panel
- Connecting the receiver
- Controlling and monitoring the receiver via the network
- Updating the firmware
- Setting up the receiver
- Installing receivers in a rack
- Displays on the receiver’s display panel
- Using the operating menu of the receiver
- SL MCR DW
- The SL Handheld DW
- The SL Bodypack DW
- The SL Tablestand 133-S DW
- The SL Tablestand 153-S DW
- The SL Boundary 114-S DW
- Pairing
- Performing a walk test (reception quality)
- The SL Headmic 1 headset microphone
- The MKE 1 clip-on microphone
- The CHG 2 charger
- The CHG 4N charger
- The CHG 2W charging base
- The AWM 2 antenna wall mount
- The AWM 4 antenna wall mount
- The SL PASC 2 passive antenna splitter/ combiner
- The SL PASC 4 passive antenna splitter/ combiner
Recommendations on antenna mounting
38
Recommendations on antenna mount-
ing
There are different factors to consider when mounting anten-
nas. This chapter provides instructions and recommendations
that you should follow when mounting antennae.
Antenna setup and planning for SpeechLine
Digital Wireless
When planning the installation of SpeechLine Digital Wireless
devices for each room, observe the following guidelines.
▷ Mount all SpeechLine Digital Wireless receivers together in
one rack.
▷ Make sure to have a direct line of sight between the trans-
mitters and the receiving antennas.
▷ Depending on the room characteristics there are several
options how to install the receiving antennas. We recom-
mend the following options in this order:
• Option 1: remotely mounted using the AWM 2 for one re-
ceiver or the AWM 4 for two receivers. >> „Option 1: Con-
necting the AWM 2 or AWM 4 antenna wall mount directly
to the receiver(s)“
• Option 2: remotely mounted using the AWM 2 or AWM 4
and multiple receivers combined using an antenna split-
ter (passive splitters SL PASC 2 or SL PASC 4). >> „Option
2: Combining multiple links to one AWM 2/AWM 4“
• Option 3: mounted in a rack (front). >> „Option 3: Rack
mounting - front“
• Option 4: mounted in a rack (rear). >> „Option 4: Rack
mounting - rear“
▷ When mounting antennas remotely, observe the minimum
distance to possibly existing DECT access points and also
take into account the cable lengths.
▷ Always switch all receivers on and off with a common pow-
er supply (e.g. a multi-outlet power strip with a central on/
off switch) in order to achieve the best performance of a
system.
You can find detailed information about the four an-
tenna mounting options under „Antenna mounting op-
tions“.