Instruction manual SpeechLine Digital Wireless
Table Of Contents
- SpeechLine Digital Wireless: System Information
- Focus on the spoken word
- The Products of the SpeechLine Digital Wireless Series
- Accessories
- SpeechLine Digital Wireless: System planning
- Planning
- Recommendations on antenna mounting
- Antenna setup and planning for SpeechLine Digital Wireless
- Antenna mounting options
- Option 1: Connecting the AWM 2 or AWM 4 antenna wall mount directly to the receiver(s)
- Option 2: Combining multiple links to one AWM 2/AWM 4
- Option 3: Rack mounting - front
- Option 4: Rack mounting - rear
- Further important information on antenna usage
- Multi-room mode
- SpeechLine Digital Wireless: Instruction manual
- SL Rack Receiver DW
- Product overview and operating elements – front panel
- Product overview and connections – rear panel
- Connecting the receiver
- Controlling and monitoring the receiver via the network
- Updating the firmware
- Setting up the receiver
- Installing receivers in a rack
- Displays on the receiver’s display panel
- Using the operating menu of the receiver
- SL MCR DW
- The SL Handheld DW
- The SL Bodypack DW
- The SL Tablestand 133-S DW
- The SL Tablestand 153-S DW
- The SL Boundary 114-S DW
- Pairing
- Performing a walk test (reception quality)
- The SL Headmic 1 headset microphone
- The MKE 1 clip-on microphone
- The CHG 2 charger
- The CHG 4N charger
- The CHG 2W charging base
- The AWM 2 antenna wall mount
- The AWM 4 antenna wall mount
- The SL PASC 2 passive antenna splitter/ combiner
- The SL PASC 4 passive antenna splitter/ combiner
Pairing
160
Pairing a receiver with a transmitter
To establish a new radio link between a receiver and a trans-
mitter, proceed as follows:
The SL Rack Receiver DW
▷ Long-press the PAIR button of the receiver until its status
LED flashes alternately green and red.
or
▷ Press the Pair button of the desired device from the device
list in the Control Cockpit.
►
First, Identify appears on the display panel of the receiver.
The Pairing message then appears.
Any existing radio link is now disconnected.
You now have 90 seconds to establish a radio link with a
new transmitter.
▷ Long-press the PAIR button of the corresponding transmit-
ter until its status LED flashes alternately green and red.
The Press pair on receiver message appears on the dis-
play panel of the transmitter (SL Handheld DW and SL
Bodypack DW only).
Once the radio link is successfully established, Paired
appears on the display panel of both the receiver and
the transmitter (only for SL Handheld DW and SL
Bodypack DW) and the status LEDs on the transmitter and the
receiver light up green.