Instruction manual SpeechLine Digital Wireless
Table Of Contents
- SpeechLine Digital Wireless: System Information
- Focus on the spoken word
- The Products of the SpeechLine Digital Wireless Series
- Accessories
- SpeechLine Digital Wireless: System planning
- Planning
- Recommendations on antenna mounting
- Antenna setup and planning for SpeechLine Digital Wireless
- Antenna mounting options
- Option 1: Connecting the AWM 2 or AWM 4 antenna wall mount directly to the receiver(s)
- Option 2: Combining multiple links to one AWM 2/AWM 4
- Option 3: Rack mounting - front
- Option 4: Rack mounting - rear
- Further important information on antenna usage
- Multi-room mode
- SpeechLine Digital Wireless: Instruction manual
- SL Rack Receiver DW
- Product overview and operating elements – front panel
- Product overview and connections – rear panel
- Connecting the receiver
- Controlling and monitoring the receiver via the network
- Updating the firmware
- Setting up the receiver
- Installing receivers in a rack
- Displays on the receiver’s display panel
- Using the operating menu of the receiver
- SL MCR DW
- The SL Handheld DW
- The SL Bodypack DW
- The SL Tablestand 133-S DW
- The SL Tablestand 153-S DW
- The SL Boundary 114-S DW
- Pairing
- Performing a walk test (reception quality)
- The SL Headmic 1 headset microphone
- The MKE 1 clip-on microphone
- The CHG 2 charger
- The CHG 4N charger
- The CHG 2W charging base
- The AWM 2 antenna wall mount
- The AWM 4 antenna wall mount
- The SL PASC 2 passive antenna splitter/ combiner
- The SL PASC 4 passive antenna splitter/ combiner
The SL Handheld DW
114
3 MUTE switch
The handheld transmitter can be muted with the MUTE switch.
This only mutes the audio signal. The radio link remains active
and the transmitter remains operational.
The MUTE switch can be deactivated in the System Settings
menu of the receiver. With the MUTE switch deactivated, the
handheld transmitter cannot be muted.
To mute the handheld transmitter:
▷ Slide the MUTE switch to the position MUTE.
Muted appears on the display panel of the receiver. The
status LED on both the handheld transmitter and the re-
ceiver lights up yellow.
►
To cancel the muting:
▷ Slide the MUTE switch to the position MIC.
4 ON/OFF button with status LED
• Short-press to switch the handheld transmitter on
• Long-press to switch the handheld transmitter off
• LED: see „Meaning of the status LED on the handheld
transmitter“
5 PAIR button
• Short-press to identify the paired receiver
• Long-press to pair with a different receiver
• See „Pairing“