Instruction manual SpeechLine Digital Wireless
Table Of Contents
- SpeechLine Digital Wireless: System Information
- Focus on the spoken word
- The Products of the SpeechLine Digital Wireless Series
- Accessories
- SpeechLine Digital Wireless: System planning
- Planning
- Recommendations on antenna mounting
- Antenna setup and planning for SpeechLine Digital Wireless
- Antenna mounting options
- Option 1: Connecting the AWM 2 or AWM 4 antenna wall mount directly to the receiver(s)
- Option 2: Combining multiple links to one AWM 2/AWM 4
- Option 3: Rack mounting - front
- Option 4: Rack mounting - rear
- Further important information on antenna usage
- Multi-room mode
- SpeechLine Digital Wireless: Instruction manual
- SL Rack Receiver DW
- Product overview and operating elements – front panel
- Product overview and connections – rear panel
- Connecting the receiver
- Controlling and monitoring the receiver via the network
- Updating the firmware
- Setting up the receiver
- Installing receivers in a rack
- Displays on the receiver’s display panel
- Using the operating menu of the receiver
- SL MCR DW
- The SL Handheld DW
- The SL Bodypack DW
- The SL Tablestand 133-S DW
- The SL Tablestand 153-S DW
- The SL Boundary 114-S DW
- Pairing
- Performing a walk test (reception quality)
- The SL Headmic 1 headset microphone
- The MKE 1 clip-on microphone
- The CHG 2 charger
- The CHG 4N charger
- The CHG 2W charging base
- The AWM 2 antenna wall mount
- The AWM 4 antenna wall mount
- The SL PASC 2 passive antenna splitter/ combiner
- The SL PASC 4 passive antenna splitter/ combiner
The SL Handheld DW
116
Displays on the display panel of the SL Hand-
held DW
►
1 Name of the radio link
• Can be entered in the Device Identification menu of the
receiver (see „Using the operating menu of the receiver“).
2 7-step display of the accupack or battery capacity
• Graphically displays the current charge status of the ac-
cupack or the batteries.
• If you use the accupack, the remaining operating time is
displayed in hours.
3 RF output power of the transmitter
• Displays the RF output power of the handheld transmit-
ter.
4 6-step display for the RF signal level
• Displays the current level of the RF signal
Starting up and using the handheld transmit-
ter
Removing/inserting the accupack
The accupack must be charged before the first use. The accu-
pack can either be charged with the optional CHG 2 or CHG 4N
chargers (see „The CHG 2 charger“ or „The CHG 4N charger“)
or with the supplied USB cable.
To remove the accupack:
▷ Simultaneously press the two unlock buttons and pull the
accupack away from the handheld transmitter.