Instruction manual SpeechLine Digital Wireless
Table Of Contents
- SpeechLine Digital Wireless: System Information
- Focus on the spoken word
- The Products of the SpeechLine Digital Wireless Series
- Accessories
- SpeechLine Digital Wireless: System planning
- Planning
- Recommendations on antenna mounting
- Antenna setup and planning for SpeechLine Digital Wireless
- Antenna mounting options
- Option 1: Connecting the AWM 2 or AWM 4 antenna wall mount directly to the receiver(s)
- Option 2: Combining multiple links to one AWM 2/AWM 4
- Option 3: Rack mounting - front
- Option 4: Rack mounting - rear
- Further important information on antenna usage
- Multi-room mode
- SpeechLine Digital Wireless: Instruction manual
- SL Rack Receiver DW
- Product overview and operating elements – front panel
- Product overview and connections – rear panel
- Connecting the receiver
- Controlling and monitoring the receiver via the network
- Updating the firmware
- Setting up the receiver
- Installing receivers in a rack
- Displays on the receiver’s display panel
- Using the operating menu of the receiver
- SL MCR DW
- The SL Handheld DW
- The SL Bodypack DW
- The SL Tablestand 133-S DW
- The SL Tablestand 153-S DW
- The SL Boundary 114-S DW
- Pairing
- Performing a walk test (reception quality)
- The SL Headmic 1 headset microphone
- The MKE 1 clip-on microphone
- The CHG 2 charger
- The CHG 4N charger
- The CHG 2W charging base
- The AWM 2 antenna wall mount
- The AWM 4 antenna wall mount
- The SL PASC 2 passive antenna splitter/ combiner
- The SL PASC 4 passive antenna splitter/ combiner
The AWM 4 antenna wall mount
207
Connecting the antenna cables
You can connect two receiver directly to the AWM 4.
▷ Connect the two antenna outputs ANT I and ANT II of the
first receiver to the connections LINK I of the AWM 4.
▷ Connect the two antenna outputs ANT I and ANT II of the
second receiver to the connections LINK II of the AWM 4.
►
You can find additional information on possible set-
ups using the AWM 4 and general recommendations
on antenna usage under „Recommendations on an-
tenna mounting“.
For direct connection of the receivers to the AWM 4, we rec-
ommend using the following low-loss Sennheiser antenna ca-
bles:
• CL 1 PP
• CL 5 PP
• CL 10 PP
• CL 20 PP
These cables can be directly connected to the SL Rack Receiv-
er DW and the AWM 4 without the need for an adapter.