Instruction manual SpeechLine Digital Wireless
Table Of Contents
- SpeechLine Digital Wireless: System Information
- Focus on the spoken word
- The Products of the SpeechLine Digital Wireless Series
- Accessories
- SpeechLine Digital Wireless: System planning
- Planning
- Recommendations on antenna mounting
- Antenna setup and planning for SpeechLine Digital Wireless
- Antenna mounting options
- Option 1: Connecting the AWM 2 or AWM 4 antenna wall mount directly to the receiver(s)
- Option 2: Combining multiple links to one AWM 2/AWM 4
- Option 3: Rack mounting - front
- Option 4: Rack mounting - rear
- Further important information on antenna usage
- Multi-room mode
- SpeechLine Digital Wireless: Instruction manual
- SL Rack Receiver DW
- Product overview and operating elements – front panel
- Product overview and connections – rear panel
- Connecting the receiver
- Controlling and monitoring the receiver via the network
- Updating the firmware
- Setting up the receiver
- Installing receivers in a rack
- Displays on the receiver’s display panel
- Using the operating menu of the receiver
- SL MCR DW
- The SL Handheld DW
- The SL Bodypack DW
- The SL Tablestand 133-S DW
- The SL Tablestand 153-S DW
- The SL Boundary 114-S DW
- Pairing
- Performing a walk test (reception quality)
- The SL Headmic 1 headset microphone
- The MKE 1 clip-on microphone
- The CHG 2 charger
- The CHG 4N charger
- The CHG 2W charging base
- The AWM 2 antenna wall mount
- The AWM 4 antenna wall mount
- The SL PASC 2 passive antenna splitter/ combiner
- The SL PASC 4 passive antenna splitter/ combiner
SL Rack Receiver DW
89
Walk Test
• Starts the walk test. See „Performing a walk test (reception
quality)“
Factory Reset
• Yes: All settings are reset to the factory defaults.
• No: The settings are retained.
System Info
• Displays the serial number and the current firmware version
of the receiver.
The Network Settings menu
The Network Settings menu at menu level 1 allows you to adjust the following settings.
Mode
• Automatic: The IP address is automatically assigned using
DHCP. If no DHCP server is available, the IP address is as-
signed by the SL Rack Receiver DW itself.
• Fixed IP: The IP address has to be entered manually.
mDNS
• Disabled: Deactivates mDNS to reduce the data volume
transferred across the network. This option is recommend-
ed for larger systems.
• Enabled: Activates mDNS to allow for automatic device de-
tection. This option is recommended for smaller systems
with up to 30 devices.