Instruction manual SpeechLine Digital Wireless
Table Of Contents
- SpeechLine Digital Wireless: System Information
- Focus on the spoken word
- The Products of the SpeechLine Digital Wireless Series
- Accessories
- SpeechLine Digital Wireless: System planning
- Planning
- Recommendations on antenna mounting
- Antenna setup and planning for SpeechLine Digital Wireless
- Antenna mounting options
- Option 1: Connecting the AWM 2 or AWM 4 antenna wall mount directly to the receiver(s)
- Option 2: Combining multiple links to one AWM 2/AWM 4
- Option 3: Rack mounting - front
- Option 4: Rack mounting - rear
- Further important information on antenna usage
- Multi-room mode
- SpeechLine Digital Wireless: Instruction manual
- SL Rack Receiver DW
- Product overview and operating elements – front panel
- Product overview and connections – rear panel
- Connecting the receiver
- Controlling and monitoring the receiver via the network
- Updating the firmware
- Setting up the receiver
- Installing receivers in a rack
- Displays on the receiver’s display panel
- Using the operating menu of the receiver
- SL MCR DW
- The SL Handheld DW
- The SL Bodypack DW
- The SL Tablestand 133-S DW
- The SL Tablestand 153-S DW
- The SL Boundary 114-S DW
- Pairing
- Performing a walk test (reception quality)
- The SL Headmic 1 headset microphone
- The MKE 1 clip-on microphone
- The CHG 2 charger
- The CHG 4N charger
- The CHG 2W charging base
- The AWM 2 antenna wall mount
- The AWM 4 antenna wall mount
- The SL PASC 2 passive antenna splitter/ combiner
- The SL PASC 4 passive antenna splitter/ combiner
SL Rack Receiver DW
66
Product overview and connections – rear pan-
el
►
►
7 ANT I and ANT II antenna sockets (R-SMA)
• Antenna inputs for connecting the supplied rod antennae
• Alternatively, the antennae can be mounted using exten-
sion cables and the AWM 2 antenna wall mount or using
the GA 4 mounting kit.
• See „GA 4 mounting kit“ as well as „The AWM 2 antenna
wall mount“ and „The AWM 4 antenna wall mount“.
8 Strain relief grip
• For the cable of the power supply unit.
• See „Connecting the receiver to the power supply sys-
tem“.
9 DC IN socket
• For the power supply's hollow jack plug.
• See „Connecting the receiver to the power supply sys-
tem“.
10AF OUT UNBAL sockets (RCA)
• Unbalanced audio output.
• See „Connecting an amplifier or mixing console to the re-
ceiver“.