Instruction manual SpeechLine Digital Wireless

Table Of Contents
The AWM 2 antenna wall mount
200
Connecting and mounting the AWM 2
Instead of the rod antennae, you can connect the optional
AWM 2 antenna wall mount to the receiver. The AWM 2 is suit-
able for all applications where the antennae are to be posi-
tioned further away from the receiver.
Unscrew and remove the four screws from the base of the
antenna wall mount and remove the cover.
To mount the antenna wall mount to a wall
Pass the antenna cable ends fitted with the R-SMA sockets
from behind through the cable hole located at the rear of
the antenna housing.
Do not kink the antenna cables and, when running the ca-
bles, make sure not to bend them beyond a bend radius of
43 mm.